The new ADS1672 from Texas Instruments is a 24-bit, 625 kSps delta-sigma analog-to-digital converter (ADC) featuring a combination of wide bandwidth, good AC and DC performance, and a dual-path digital filter to give flexibility to designers of automated test equipment, test and measurement, medical instrumentation, vibration analysis and sonar/military equipment.
The user-selectable dual-path digital filter allows designers to optimise the trade-off between bandwidth and latency to maximise performance of their application. The wide-bandwidth path provides AC performance of 305 kHz bandwidth path and very low passband ripple, enabling continuous measurements, such as those required in sonar, vibration monitoring and communications equipment. The low-latency path provides settling time of only 5,5 μs for applications with transient inputs or when used with a multiplexer.
The ADS1672 integrates a chopper-stabilised modulator, which enables both AC performance and DC accuracy characteristics. For example, it is possible to achieve AC performance of 107 dB dynamic range at 625 kSps, 116 dB dynamic at 78 kSps and -115 dB total harmonic distortion (THD), and DC accuracy of 3 ppm integral nonlinearity, 2 μV/C offset drift and 2 ppm/C gain drift.
The IC features a selectable serial interface, either LVDS or CMOS, for connectivity to MCUs, DSPs or FPGAs. Operating from a single 5 V analog supply and 3 V digital supply, it dissipates only 350 mW of power and is fully specified over the industrial temperature range of -40°C to 85°C.
Dual-range IMU with edge processing EBV Electrolink
Analogue, Mixed Signal, LSI
ST’s innovative LSM6DSV80X combines two accelerometer structures for 16 g and 80 g full-scale sensing, a gyroscope up 4000 dps, and embedded intelligence in a single component.
Read more...High-reliability isolation amplifiers EBV Electrolink
Analogue, Mixed Signal, LSI
The VIA series of isolation amplifiers from Vishay are designed to deliver exceptional thermal stability and precise measurement capabilities.
Read more...Mibbo QT2C Series signal isolators Conical Technologies
Analogue, Mixed Signal, LSI
The Mibbo QT2C Series isolators support a rich combination of input and output signals, working with either current loops or voltage levels.
Read more...First NVMe SSD Built with 8th-gen BiCS FLASH EBV Electrolink
Computer/Embedded Technology
KIOXIA recently announced the development and prototype demonstration of its new KIOXIA CM9 Series PCIe 5.0 NVMe SSDs, which incorporates CMOS directly Bonded to Array technology.
Read more...IMU with dual-sensing capability EBV Electrolink
Analogue, Mixed Signal, LSI
ST’s 6-axis inertial measurement unit integrates a dual accelerometer up to 320g and embedded AI for activity tracking and high-impact sensing.
Read more...Plural data converter series
Analogue, Mixed Signal, LSI
Silanna Semiconductor has announced the launch of Plural, a new generation of data converters for customers eager to find a more available, affordable, high-performance alternative to existing brands.
Read more...Precision JFET op-amp Altron Arrow
Analogue, Mixed Signal, LSI
The specifications of the ADA4620 make it optimal as a front-end amplifier in a data-acquisition system, or for a TIA circuit with high input impedance.
Read more...Battery monitoring and balancing IC EBV Electrolink
Power Electronics / Power Management
The TLE9009DQU from Infineon is a multi-channel battery monitoring and balancing IC crafted for Li-Ion battery packs.
Read more...KIOXIA pioneer new 3D Flash technology EBV Electrolink
DSP, Micros & Memory
KIOXIA Corporation and Sandisk Corporation have pioneered a state-of-the-art 3D flash memory technology, setting the industry benchmark with a 4,8 Gb/s NAND interface speed, superior power efficiency, and heightened density.
Read more...Super-fast H.264 encoder FPGA core EBV Electrolink
DSP, Micros & Memory
An ITAR-compliant H.264 core designed for AMD FPGAs provides baseline H.264 support and is currently the smallest and fastest FPGA core in the industry.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version