Potentiometers now with solder lug leads

29 October 2008 Passive Components

Providing design engineers with a termination method specifically designed for manual wire soldering, BI Technologies has expanded its family of 12,7 mm rotary potentiometers to include devices with solder lug terminations.

Designated the Model P261 potentiometer, the side-adjust device features up to six gangs and is available in potentiometer, rotary switch and detent modules. The elliptic holes on the solder lug leads measure 1,8 mm x 1,0 mm and fit wire sizes from AWG 20 to AWG 40.

The devices feature a conductive plastic element, are sealed for contaminated environments and have a rotational life of 1 million cycles. Resistance ranges from 500 Ω to 1 MΩ, with power ratings of 0,25 W and 0,5 W. Standard tolerance is to ±10%, with a maximum input voltage of 350 V a.c. and a dielectric strength of 1500 V a.c. Operating temperature ranges from -55°C to +125°C.

Typical applications for the product family include joysticks, musical instruments, industrial controls, position sensors and board mounted panel controls.

Further reading:

SMT flat-wire inductor for automotive electronics
Würth Electronics South Africa Passive Components
Würth Elektronik introduces its new WE-SFIA series of flat-wire inductors in 2010, 2013, and 2016 packages.

Read more...

---

Nanocrystalline cores for cable assembly
Würth Electronics South Africa Passive Components
Conventional MnZn and NiZn ferrite cores for cable assembly are now complemented by nanocrystalline cable cores.

Read more...

---

Heat sinks for power-electronics and IC components
Würth Electronics South Africa Passive Components
Würth Elektronik introduces heat sinks for power-electronics and IC components.

Read more...

---

Cooling solutions for modern electronics
Future Electronics Passive Components
As electronic systems become more compact and powerful, effective thermal management has become a critical aspect of product design.

Read more...

---

DC-link capacitors with ultra-low inductance
Electrocomp Passive Components
TDK Corporation recently released its new series of MKP DC high-frequency film capacitors, a high-performance DC link capacitor platform for next-generation SiC-based power electronics.

Read more...

---

Generating negative voltages from a positive supply
Altron Arrow Editor's Choice Passive Components
It is common for IoT devices, industrial sensors, meters, and medical equipment to require both a positive and negative voltage, and this article explains the options available to produce a negative rail from a positive rail supply.

Read more...

---

High-precision thick-film resistors
Avnet Silica Passive Components
The new Panasonic ERJPC high precision thick-film resistors series deliver accuracy levels previously only achievable with thin film technology, offering customers higher power density and cost-effective performance.

Read more...

---

Semi-shielded power inductors
RS South Africa Passive Components
The SDCx family from Eaton includes the SDCL and SDCH series of semi-shielded power inductors designed for reliable performance in consumer, industrial, energy, and medical applications.

Read more...

---

Compact high-current power inductor
EBV Electrolink Passive Components
Vishay’s IHLP series power inductors deliver high current capability in an ultra-low profile, magnetically shielded design.

Read more...

---

Tiny noise suppression filters
RS South Africa Passive Components
TDK Corporation recently announced its latest noise suppression filters of the MAF0603GWY series, which measure only 0,6 x 0,3 x 0,3 mm.

Read more...

---