|
|
Samtec shrinks new PowerStrip
26 November 2008, Interconnection
Samtec recently released the newest member of its ruggedised PowerStrip family known as PowerStrip/25 (MPT/MPS Series). It is 20% smaller than the standard industry form factor and is rated at 25 A per contact. The MPT series is available with up to eight power pins on a 5,08 mm pitch in about 6,5 square centimetres, allowing for more circuit board real estate.
Other features include vertical headers for a 14 mm stack height, right angle headers for 90° applications, and optional screwdowns for added ruggedness. The number of contact options includes two, four, six and eight positions. Locking clips are also used to hold the connector in place prior to soldering. |
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- Compression lugs and splices
26 June 2019, TRX Electronics, Interconnection
Panduit Pan-Lug compression connectors provide permanent terminations for a variety of power and grounding applications.
The connectors are designed for use with many different code and flex conductor ...
- Test point pins
26 June 2019, Vepac Electronics, Interconnection
The range of terminal pins available from Vero Technologies provide an easily useable fitting on a through-hole printed circuit board (PCB) for the attachment of oscilloscope probes, multimeter leads ...
- Pin strips for KNX applications
26 June 2019, Wiltron Agencies, Interconnection
The pins of the STL190 through-hole pin strips were designed by PTR specifically for KNX applications in home, building and system technology. Positioned by means of a carrier pad at a spacing clearance ...
- High-temperature FFC/FPC connectors
26 June 2019, Otto Marketing, Interconnection
Hirose Electric’s new FH52K series of robust flat flexible cable/flat printed circuit (FFC/FPC) connectors are designed to withstand higher operating temperatures than standard FFC/FPC connectors. The ...
- Modular fibre-optic patch panel
26 June 2019, Webb Industries, Interconnection
The latest from Webb Industries is Telegärtner’s Fibre Termination Box (FTB) – a modular fibre-optic patch panel system which facilitates customised cabling in locations where large numbers of apartments ...
- High-speed M12 connectors for transportation
29 May 2019, Webb Industries, Interconnection
Telegärtner’s range of connectors for railway and vehicle applications has been expanded with the introduction of a new product series. An add-on to the previous M12 connector series, the new series contains ...
- Board-to-board connectors
29 May 2019, TRX Electronics, Interconnection
A new product series of robust board-to-board connectors from Phoenix Contact includes shielded connectors with a pitch of 0,8 mm and unshielded versions with a pitch of 1,27 mm.
The Fine Pitch series ...
- Durable board-to-board connector
29 May 2019, Otto Marketing, Interconnection
Hirose Electric has developed a high contact reliability connector with a -40°C to 140°C operating temperature that maintains high performance in vibration environments, including on-board powertrain.
While ...
- Coax-to-PCB connectors
29 May 2019, TRX Electronics, Interconnection
Amphenol SV Microwave’s high-speed RF/coaxial solderless edge launch connectors are ideal for high-frequency printed circuit board applications where precision is key. These rugged and durable interconnects ...
- Wire-/board-to-board connectors
29 May 2019, TRX Electronics, Interconnection
Minitek is Amphenol ICC's brand for board-to-board and wire/cable-to-board connectors in 2,00 mm pitch. It is a fully modular system enabling all types of connections between printed circuit boards, wires ...
- Choosing the right connector for harsh environments
30 April 2019, TRX Electronics, This Week's Editor's Pick, Interconnection
While connectors are sometimes left to last in a system design, they are essential components, and you need to get their selection right.
- Connectors 101 for lighting designers
30 April 2019, Avnet South Africa, Interconnection
Selecting the best connector for a lighting application is a matter of matching application requirements to available connectors, with proper consideration given to performance and costs.
|
|
