ON Semiconductor has extended its bipolar stepper motor control family to include two new serial peripheral interface (SPI) versions of a motor driver capable of peak currents up to 800 mA and for use with an external microcontroller for added flexibility.
The AMIS-30511 and AMIS-30512 eliminate the need for many external components, reducing system cost and bill of materials.
Both of the new mixed-signal ICs contain two embedded H-bridges that can drive two-phase stepper motors with sustained peak currents up to 400 mA and maximum currents up to 800 mA for short durations. Each also allows a host microcontroller to detect blocked rotor and end-of-run conditions without additional switches, Hall sensors or optical encoders. In addition to stall detection, these functions allow the designer to program the microcontroller to calculate rotor position and to dynamically adjust current or speed as required to prevent step loss. This capability eliminates noise and vibration at end-stops and improves motion-control accuracy and reliability without additional components.
The 30512 contains a 5 V regulator to supply both internal logic and up to 50 mA for external components, such as a microprocessor. It also has watchdog logic circuitry to prevent an external microprocessor from 'hanging up'.
Typical uses for the ICs include security cameras, building and industrial automation, motor control, textile processing, process equipment, robotics, HVAC and base station control and status.
High-temperature closed-loop MEMS accelerometer RS South Africa
Analogue, Mixed Signal, LSI
This sensor from TDK is a high-temperature MEMS accelerometer with ±14 g input range and a digital interface for measurement while drilling applications.
Read more...New SiC power MOSFET Future Electronics
Power Electronics / Power Management
STMicroelectronics’ SCT012H90G3AG is a robust, automotive-grade SiC MOSFET, engineered for demanding power electronics, featuring a 900?V drain-source voltage and exceptionally low on-resistance of 12?mO at 60?A.
Read more...Satellite IoT through non-terrestrial networks Future Electronics
Editor's Choice Telecoms, Datacoms, Wireless, IoT
Non-terrestrial networks fill cellular coverage gaps in remote areas by extending terrestrial networks and are not subject to disruptions from natural disasters or sabotage.
Read more...1D Time-of-Flight sensor Future Electronics
Telecoms, Datacoms, Wireless, IoT
ams OSRAM has introduced its TMF8806, a 1D Time-of-Flight sensor that has been developed to remove the barriers of previous single-zone dToF devices.
Read more...Dual accelerometers on the same die Altron Arrow
Analogue, Mixed Signal, LSI
The LSM6DSV320X is the first mainstream inertial sensor to house a gyroscope alongside two accelerometers, one capable of sensing up to ±16 g and one sensing up to a staggering ±320 g.
Read more...Easy installation panel mount assembly Future Electronics
Enclosures, Racks, Cabinets & Panel Products
NKK’s new easy installation Panel Mount Assembly (the BYB201-470) consists of a PCB, resistor, connector, and a straight PC adaptor.
Read more...Dual-range IMU with edge processing EBV Electrolink
Analogue, Mixed Signal, LSI
ST’s innovative LSM6DSV80X combines two accelerometer structures for 16 g and 80 g full-scale sensing, a gyroscope up 4000 dps, and embedded intelligence in a single component.
Read more...High-reliability isolation amplifiers EBV Electrolink
Analogue, Mixed Signal, LSI
The VIA series of isolation amplifiers from Vishay are designed to deliver exceptional thermal stability and precise measurement capabilities.
Read more...Mibbo QT2C Series signal isolators Conical Technologies
Analogue, Mixed Signal, LSI
The Mibbo QT2C Series isolators support a rich combination of input and output signals, working with either current loops or voltage levels.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version