24 V GMR current sensor

4 March 2009 Passive Components

NVE’s AAV003-10E GMR current sensor now features a maximum bridge input voltage of 24 V, as opposed to its former rating of 12 V, making it compatible with PLC logic applications for industrial process control and instrumentation.

The sensor features high linearity and low hysteresis with an on-chip current strap. A GMR bridge sensor element close to the current strap senses the magnetic field created by the current. The GMR sensor element uses a unique, bipolar-output, low-hysteresis GMR material for excellent accuracy. The four terminals of the bridge sensor are available externally. The output terminals of the bridge provide a bipolar voltage signal proportional to the current through the strap.

The module provides typical sensitivity of 2 mV/mA with no amplification from

-80 mA to +80 mA. This sensitivity makes it suitable for 4–20 mA current loop detection. In addition to the higher bridge voltage specification, the sensor now has an isolation voltage specification of 240 Vrms.

The sensor comes in an ultra-miniature 2,5 x 2,5 mm 6-pin TDFN package.

Further reading:

Harnessing Leakage Inductance
Würth Electronics South Africa Passive Components
Würth Electronics has expanded its WE-MCRI product series with the new 1090HL variant (HL = High Leakage), a coupled inductor specifically designed to improve the performance of SEPIC, ZETA and Cuk converters.

Read more...

---

Ultra-slim 30 W DIN Rail AC/DC
Brabek Passive Components
RECOM is extending its REFIN family with the new REFIN2U-S30.

Read more...

---

Panasonic thick film current sense resistors
Avnet Abacus Passive Components
Panasonic thick film current sense resistors enable potential cost savings up to 50% as an alternative to metal shunts

Read more...

---

Space saving SMD common-mode chokes
Electrocomp Passive Components
TDK Corporation presents the EP21 series of flat-wire double chokes designed for common-mode EMI filtering and available in an SMD format with dimensions of only 23,8 x 17,7 mm and heights ranging from 21,6 to 22,3 mm

Read more...

---

Highly rugged GAPS and HAPS proximity sensors
IOT Electronics Passive Components
Now available through Powell Electronics are the GAPS (General Aerospace Proximity Sensors) and HAPS (Harsh Application Proximity Sensors) proximity sensors from Honeywell.

Read more...

---

Understanding EMI Filters and their applications
Vepac Electronics Passive Components
Electromagnetic Interference (EMI) Filters are essential for maintaining electromagnetic compatibility (EMC), allowing multiple devices to function together without interference.

Read more...

---

SMT flat-wire inductor
Passive Components
Würth Elektronik introduces its new WE-SFIA series of flat-wire inductors in 2010, 2013, and 2016 packages.

Read more...

---

Compact SSI family for industrial automation
Altron Arrow Passive Components
Infineon Technologies has introduced the ISSI20BxxF Solid State Isolator (SSI) family, bringing solid-state isolation technology into high-volume applications traditionally served by photovoltaic isolators (PVIs), photovoltaic relays (PVRs), and electromechanical relays (EMRs).

Read more...

---

SGMICRO expands analogue IC portfolio
iCorp Technologies Passive Components Telecoms, Datacoms, Wireless, IoT
SGMICRO continues to add to its analogue IC portfolio at a steady pace, with new devices released across power protection, power conversion, current sensing and RF signal-chain categories.

Read more...

---

SMT flat-wire inductor for automotive electronics
Würth Electronics South Africa Passive Components
Würth Elektronik introduces its new WE-SFIA series of flat-wire inductors in 2010, 2013, and 2016 packages.

Read more...

---