Compact low-light CCD imaging system

4 March 2009 Opto-Electronics

e2v technologies’ L3C216 Series compact low-light CCD imaging system provides the features of the existing L3Vision range in a smaller package and requires less power. The 2/3” format sensor allows use with smaller optical components, reducing system payload. Since the sensor is back-thinned, performance is similar to that obtained with e2v’s existing 1” format sensors. An improved CCD manufacturing process reduces horizontal smear.

The package is designed so that the imaging section may be separated from the drive electronics by 150 mm, simplifying installation in tightly packed environments.

The L3C216 series offers an enhanced blue response, analog and digital outputs and automatic image enhancement. With 768 pixels/line it provides an onscreen display for manual control/monitoring and fanless cooling. Signal to noise ratio is 35 dB and the imaging area is 9,06 x 6,62 mm.

Typical applications include air and ground surveillance, underwater imaging, driver view enhancement, commander’s night-sight and scientific imaging.

For more information contact AfriMeasure, +27 (0)11 675 4447.

Further reading:

PhotoMOS relays
Future Electronics Opto-Electronics
The AQY221R2SX and AQY221R2S PhotoMOS from Panasonic Industry ensures excellent characteristics and high-speed switching performance.

Read more...

---

Mouser now shipping onsemi’s image sensors
TRX Electronics Opto-Electronics
The AR0145CS is a 1/4,3-inch CMOS digital image sensor with a 1280 (H) x 800 (V) active-pixel array that can capture both continuous video and single frames.

Read more...

---

Adaptive optics’ power solution
Altron Arrow Opto-Electronics
Vicor power-dense adaptive optical modules enable colossal telescopes to look into the past for deep space discoveries.

Read more...

---

Ultra-high speed photo detection
Opto-Electronics
TDK Corporation has announced a photo-spintronic conversion element combining optical, electronic, and magnetic elements that can respond at an ultra-high speed of 20 picoseconds.

Read more...

---

High-speed lasers
RFiber Solutions Opto-Electronics
Macom are a high-volume manufacturer of lasers, deploying more than 100 million devices with a reliability of less than 50 FIT and greater than 100 years of wear-out lifetime

Read more...

---

High-performance optical interconnect
Opto-Electronics
STMicroelectronics has unveiled its next generation of proprietary technologies for higher-performing optical interconnect in datacentres and AI clusters.

Read more...

---

Halo mid-board optical transceiver
Spectrum Concepts Opto-Electronics
The Samtec Halo mid-board transceiver has been designed for next-generation embedded applications that require 56 and 112 Gbps PAM4 performance in low profile and ruggedised form factors.

Read more...

---

New generation of Ethernet media converters
IOT Electronics Opto-Electronics
Phoenix Contact is introducing three new families of media converters to the market, each designed for specific industrial environments and challenges.

Read more...

---

PIN photodiode with integrated lens
RFiber Solutions Opto-Electronics
The MARP-BP112 from Macom is a backside-illuminated PIN photodiode, usable from 1200 nm to 1650 nm, that is optimised for use in 112 GBaud PAM4 applications.

Read more...

---

RGBIR sensor with I2C interface
Electrocomp Opto-Electronics
Available in a miniature opaque 2,67 x 2,45 mm package, Vishay’s VEML6046X00 includes high-sensitivity photodiodes, a low noise amplifier, and a 16-bit analogue to digital converter.

Read more...

---