Phihong has announced the addition of 48 V output models to its existing PSAA60W and PSAA60M single-output adapter series. The PSAA60W-480 two-wire input adapter and the PSAA60M-480 three-wire input adapter are the latest additions to series that already include 12, 15, 18, and 24 V output models. The 48 V adapters better address networking, data communications and IP applications.
The new adapters comply with the United States’ Energy Independence and Security Act of 2007 (EISA), as well as with Class B conducted and radiated electromagnetic emissions. Additionally, they bear cUL/UL, CE and CB safety markings and approvals.
The adapters operate at a minimum of 85% average output efficiency and feature no-load power consumption of less than 0,5 W. They are rated to operate between 0°C and 40°C and between 10% and 90% humidity. They also feature short-circuit and over-voltage protection with auto restart, as well as over-current protection.
PSAA60W and PSAA60M series adapters come in fully sealed, splash-proof cases that measure 13 cm in length by 6 cm in width by 3,3 cm in height. The adapters’ DC cords all terminate with a 2,1 mm by 5,5 mm centre-positive DC output connecter.
4 kW e-mobility DC-DC converter Brabek
Power Electronics / Power Management
The RECOM RMOD4000 series of compact, plug-and-play DC-DC converters is a cost-effective solution to provide isolated 14 V, 28 V, or 56 V DC network rails from a high input voltage between 180 and 950 V DC.
Read more...Aluminium case upgrade boosts performance Vepac Electronics
Power Electronics / Power Management
The SQBF Quarter Brick 300 W DC to DC Converter is now available in a newly upgraded metal case designed to deliver improved durability and superior electrical performance across demanding applications.
Read more...Extending the range of power converters RS South Africa
Power Electronics / Power Management
Power Integrations recently announced a breakthrough in flyback topology extending the power range of flyback converters to 440 W - well beyond the limits that traditionally required more complex resonant and LLC topologies.
Read more...Power-dense modules operate up to 115 V DC Brabek
Power Electronics / Power Management
The RPMVH-0.5 series of cost-effective, non-isolated buck regulator modules from RECOM delivers 0,5A of output at fully regulated voltages up to 24 V DC.
Read more...Finding value for money with your IoT battery Uniross Batteries
Power Electronics / Power Management
Designing an IoT application involves a lot of choices. Designers are looking for performance and quality, but need to balance those alongside a low Total Cost of Ownership.
Read more...Powering the IoT Uniross Batteries
Power Electronics / Power Management
Choosing the right battery is not simply a technical detail, but a defining factor in the longevity and cost-effectiveness of any IoT deployment.
Read more...The move to DC infrastructure IOT Electronics
Power Electronics / Power Management
The shift toward direct current infrastructure in data centres is accelerating as operators pursue higher efficiency, improved reliability, and stronger alignment with renewable energy goals.
Read more...Power inductor for automotive applications Würth Elektronik eiSos
Power Electronics / Power Management
The WE-MXGA inductor features RDC values up to 25% lower and a saturation current up to 47% higher compared to other components currently available on the market.
Read more...High-performance DC-DC converter Conical Technologies
Power Electronics / Power Management
With a wide 9 - 40 V DC input range, the Claf Power DWHB400-F24xxN series is a high-performance DC-DC converter family ideally suited for 12 V and 24 V battery-based systems including vehicles, off-grid installations, and distributed power architectures.
Read more...DC-DC converters for next-generation IoT iCorp Technologies
Power Electronics / Power Management
AIPUPOWER’s K78XXJT-500R3 and K78XXJT-500R3-LB give designers a compact, high-efficiency power option for battery-powered and space-constrained systems, combining up to 96% efficiency with no-load input current as low as 0,2 mA.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version