Analogue, Mixed Signal, LSI


Op-amp suits audio applications

29 April 2009 Analogue, Mixed Signal, LSI

The new AS1713 operational amplifier from austriamicrosystems is a high output differential line receiver with 10 MHz, 10 V/μs, rail-to-rail I/O performance, making it suitable for audio applications such as headphone drivers and audio line receivers and buffers.

The device operates from a single +2,7 V to +5,5 V supply and can swing to within 100 mV from the rails while sinking or sourcing 50 mA of output current. Large short-time loads, common in various applications such as in audio amplification, are supported by a peak output current of more than 200 mA. The IC requires only 1,6 mA of supply current and 1 nA while in shutdown.

The AS1713 offers a fixed differential voltage gain of 1. Internal matched resistors reduce external component count and costs and flexible interconnections support external gain setting and adjustments in other applications. The trimmed resistor network also allows the part to be used as a low cost, general purpose instrumentation amplifier. Gain and impedance conversion may be provided by adding an external dual amplifier to create the classic three amplifier IA (instrument amplifier) structure.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Siemens acquires Canopus AI
ASIC Design Services News
The acquisition extends Siemens’ comprehensive EDA software portfolio with computational metrology and inspection to help chipmakers solve critical technical challenges in semiconductor manufacturing.

Read more...
High-speed Flash for system-on-chip applications
NuVision Electronics DSP, Micros & Memory
GigaDevice unveiled the GD25NE series of dual-power supply SPI NOR Flash chips, designed specifically for 1,2 V SoC applications.

Read more...
High-performance µC series
NuVision Electronics Computer/Embedded Technology
GigaDevice has announced the official launch of the GD32F503/505 high-performance series of 32-bit general-purpose microcontrollers based on the Arm Cortex-M33 core.

Read more...
High power from DC to 6 GHz
NuVision Electronics Telecoms, Datacoms, Wireless, IoT
WAVEPIA’s latest GaN-on-SiC transistor, the WP2806015UH(S), delivers up to 15 W power from DC to 6 GHz at 28 V.

Read more...
High-density planar power for mission-critical systems
NuVision Electronics Power Electronics / Power Management
Vishay’s SGTPL-28 family of planar transformers offer 150 W of output power from a 28 V input forward-converter architecture.

Read more...
Smart IMU for high/low-g acceleration
Altron Arrow Analogue, Mixed Signal, LSI
The ISM6HG256X is a 6-axis intelligent inertial measurement unit that enables smart motion sensing, edge computing, and real-time awareness.

Read more...
Aligning clocks over large distances
ASIC Design Services Test & Measurement
SkyWire technology from Microchip makes it easier to align and compare clocks within nanoseconds across geographic locations.

Read more...
High-accuracy time transfer solution
ASIC Design Services Telecoms, Datacoms, Wireless, IoT
Microchip Technology recently announced the release of the TimeProvider 4500 v3 grandmaster clock (TP4500) designed to deliver sub-nanosecond accuracy for time distribution across 800 km long-haul optical transmission.

Read more...
Compact Schottky diodes increase efficiency
RS South Africa Analogue, Mixed Signal, LSI
Gen 3 SiC Schottky diodes from Vishay in the compact SlimSMA HV package increase efficiency while enhancing electrical insulation.

Read more...
Silanna launches Plural ADC EVKs
Analogue, Mixed Signal, LSI
Silanna Semiconductor has released its first evaluation kits for the Plural data converter family to offer the fastest, most cost-effective way to evaluate and deploy high-performance ADCs.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved