Interconnection


Connectors provide airtight sealing

10 June 2009 Interconnection

Souriau’s UTS In-Line is a connector designed to expand or repair links, and which assures a level of dynamic airtight sealing to IP68 or IP69K. It is an ideal solution for demanding applications such as robotics, off-road, road signage and railway signalling. The screw contact termination variant makes it a valuable companion for installation engineers.

The connector is a modular solution available in four sizes and 13 contact arrangements. It is available with crimp, solder or screw contacts, all of which are intermateable. The fact that one connector with screw contacts can be coupled to a connector with solder or screw contacts makes it particularly relevant to line extension repairs. All combinations are possible: cable-to-cable with standard connector, wire-to-wire with grommet connector, or wire-to-cable using both a standard connector and a grommet connector.

The compact, all-plastic connector has no square edge, allowing it to be easily inserted, for example, in a narrow sheath or in areas that are difficult to access. It can transmit low or high power (up to 26 amps), or a signal of just a few milliamps.

Like the rest of the UTS range, UTS In-Line seals to IP68 and IP69K. This gives it immersion stability to a depth of 10 m and, in cleaning operations, to pressures of 140 bar. This sealing is also dynamic: in concrete terms, this means it is protected even when the cable is drawn in all directions. The material, a high performance plastic, resists shock and vibration and offers temperature performance from -40°C to +105°C. The connectors are also resistant to salt spray (up to 500 hours) and to UV, which enhances their reliability in outdoor applications.

UTS In-Line is also fitted with an ergonomic TRIM TRIO closing mechanism – an interlocking third-of-a-turn bayonet with a sensitive, audible click that guarantees a good connection. It is good for 250 operations and supports Ethernet 10 BaseT, 100 BaseTX, 1000 BaseT, Cat5e (TIA/EIA 568B) and D class (ISO/IEC 11801).



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Prefitted junction box solutions
Interconnection
Prepopulated junction boxes in popular terminal configurations, such as single- and three-phase, enhance convenience for both electrical wholesalers and contractors.

Read more...
Bulgin unveils new range of sustainable connectors
Avnet Abacus Interconnection
The Standard Vitalis Buccaneer range of waterproof connectors is a bio-based alternative to Bulgin’s flagship series, the Standard Buccaneer, offering the same technical performance with improved sustainability.

Read more...
Possible copper cable crisis looms as global demand soars
Interconnection
With the world requiring up to 3 billion metric tons of copper by 2050 to support green energy transitions and developing nations’ infrastructure, far exceeding the 23 million metric tons mined in 2024, pressure on supply chains is mounting.

Read more...
High-reliability spring-loaded interconnects
Spectrum Concepts Interconnection
These springs from Mill-Max are drop-in replacements for the standard springs, requiring no changes to the form or fit of the existing spring-loaded pins.

Read more...
Anoison PCB mount connectors for high-performance applications
Conical Technologies Interconnection
With its wide selection, Anoison provides PCB mount connectors that combine precision, durability, and cost-effectiveness across industries.

Read more...
Clearing the Static: Fundamental principles of static control
Actum Circuit & System Protection
Controlling electrostatic discharge in electronics manufacturing is essential with effective ESD programs built on six key principles.

Read more...
Connectors for the Smart Factory
Spectrum Concepts Interconnection
[Sponsored] Designing networks for the smart factory can seem daunting, but the solutions are already available with Samtec providing a comprehensive range of interconnect technologies tailored to the demands of the modern factory.

Read more...
Mouser shares expert design solutions for advanced robotics development
Interconnection
Mouser Electronics has announced a new interactive eBook, ‘The Electric Workforce’, in collaboration with electronics manufacturer and connectivity innovator, Molex.

Read more...
Clearing the Static: ESD training in the workplace
Actum Circuit & System Protection
To protect sensitive electronic components, A structured, consistent, and sustainable ESD training program is essential.

Read more...
Explosive zone connectors
Interconnection
The connector series design by Glenair is optimised for fast and easy crimp-contact wire termination, with ample wiring space in the cable housing and accessory hardware.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved