Secure transmission of information on data highways requires special security measures, because today more and more high performance data transmission at high speeds is required.
Designed for these requirements are the new shielded connectors to DIN 41612/IEC 603-2 and ANSI/VITA Standard for VME 64, Version ANSI/VITA 1-1994, approved 10 April 1995. This version has 32 shielded contacts and 96 signal contacts, the main advantages of a very low return loss, low crosstalk and a very low insertion loss. The shielded type C on a Eurocard with 2,54 mm pitch uses the standard PCB hole pattern.
Erni shielded connectors are mateable with standard DIN 41612/IEC 603-2 type C connectors.
Choosing the right interconnect strategy Spectrum Concepts
Interconnection
[Sponsored] PCI Express (PCIe) has become the backbone of modern high-performance systems with each new generation promising higher bandwidth; but that performance comes with a cost.
Read more...Compact connector integration cable grommet
Interconnection
icotek has expanded its IMAS-CONNECT adapter system with the introduction of the AT-HA grommet, a compact solution designed to simplify the integration of industrial connectors into cable entry systems.
Read more...Outdoor rated high density cable entry
Interconnection
icotek has introduced the KEL-DPU-OD cable entry plate, a rugged solution engineered for applications exposed to intense UV radiation, weathering, and wide temperature variations.
Read more...Clearing the Static: The importance of ESD audits Actum
Circuit & System Protection
An ESD audit is the first step in establishing an effective static control programme in the workplace, and will help identify vulnerable areas and potentially hazardous static zones that require improvement.
Read more...Omniball through-hole contacts Spectrum Concepts
Interconnection
Mill-Max has introduced an expansion to its Omniball spring-loaded contact range with a new series of through-hole mount Omniball pins designed for robust and versatile interconnect solutions.
Read more...Clearing the Static: ESD containers and packaging Actum
Circuit & System Protection Vacuum forming ESD
Electronic components can be damaged by electrostatic discharges. To protect against such damage, electronic assembly parts are often transported or stored in vacuum formed component ...
Read more...Phoenix’s Push-X range is growing Phoenix Contact
Interconnection
With the new XT 1,5 terminal blocks, Phoenix Contact is extending the series to include versions for conductor cross-sections from 0,34 to 2.5 mm2.
Read more...Connector range for demanding environments Future Electronics
Interconnection
TE Connectivity’s DEUTSCH connector range offers high-performance interconnect solutions engineered for demanding environments where reliability and durability are essential.
Read more...Antistatic vinyl flooring Actum
Manufacturing / Production Technology, Hardware & Services
Vinyl is an affordable, antistatic tile or sheet with a life-span greater than 10 years and installed as a permanent electrostatic discharge floor.
Read more...Electrostatic discharge chairs Actum
Circuit & System Protection
An ESD chair forms an integral part of grounding within the electrostatic discharge protected area to prevent potential damage to products.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version