Texas Instruments has introduced a fully integrated, 10 A synchronous buck converter with integrated FETs that combines wide input, light load efficiency and reduced solution size to enable increased power density.
The TPS51315, a 1 MHz DC-DC switcher, features D-CAP mode control scheme, which allows for fast transient response while reducing the required number of external output capacitors. This converter helps designers meet Energy Star/90 Plus guidelines by utilising auto-skip mode and Eco-mode light load control schemes to achieve high efficiency across the entire load range. Its wide input and output voltage ranges and programmable switching frequency can enable designers to meet the requirements of power-dense applications in embedded PCs, notebooks and other computing applications, as well as base stations and network attached storage.
An input voltage of 3 to 14 V and an output voltage range of 0,75 to 5,5 V allow for flexible design in 3,3 V, 5 V and 12 V power systems and can power various components, such as DSPs, FPGAs, ASICs, I/O and DDR memory cores. Integrated power MOSFETs enable efficiency of more than 91% at full 10 A output current.
Powering the IoT Uniross Batteries
Power Electronics / Power Management
Choosing the right battery is not simply a technical detail, but a defining factor in the longevity and cost-effectiveness of any IoT deployment.
Read more...Cost-effective microcontroller series Altron Arrow
DSP, Micros & Memory
The STM32C5 series from STMicroelectronics delivers an excellent balance of performance, efficiency, and affordability for embedded designs that require more capability without increasing bill of materials cost.
Read more...Understanding two key tools for cleaner serial data Altron Arrow
Editor's Choice Analogue, Mixed Signal, LSI
Understanding how pre-emphasis and equalisation works, and when to use one over the other, is critical when designing reliable high-speed systems.
Read more...The move to DC infrastructure IOT Electronics
Power Electronics / Power Management
The shift toward direct current infrastructure in data centres is accelerating as operators pursue higher efficiency, improved reliability, and stronger alignment with renewable energy goals.
Read more...Power inductor for automotive applications Würth Elektronik eiSos
Power Electronics / Power Management
The WE-MXGA inductor features RDC values up to 25% lower and a saturation current up to 47% higher compared to other components currently available on the market.
Read more...High-performance DC-DC converter Conical Technologies
Power Electronics / Power Management
With a wide 9 - 40 V DC input range, the Claf Power DWHB400-F24xxN series is a high-performance DC-DC converter family ideally suited for 12 V and 24 V battery-based systems including vehicles, off-grid installations, and distributed power architectures.
Read more...DC-DC converters for next-generation IoT iCorp Technologies
Power Electronics / Power Management
AIPUPOWER’s K78XXJT-500R3 and K78XXJT-500R3-LB give designers a compact, high-efficiency power option for battery-powered and space-constrained systems, combining up to 96% efficiency with no-load input current as low as 0,2 mA.
Read more...Ultra-low jitter clocks Altron Arrow
Telecoms, Datacoms, Wireless, IoT
Skyworks has introduced a new family of ultra-low jitter programmable clocks designed to meet the increasing demands of next-gen connectivity.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version