Opto-Electronics


HB LEDs for solid-state lighting

19 August 2009 Opto-Electronics

New from Avago are small, high-brightness 3 W LEDs for use in a range of solid-state lighting applications. With dimensions of 5 x 4 x 1,85 mm, the compact ASMT-Jx3x is packaged in a small outline package capable of being driven to up to 700 mA to provide high flux output performance. Typical applications include portable lighting appliances, street lighting, architectural façade lighting, retail display lighting, backlighting as well as specialty lighting applications.

Despite its compact size, the LED provides a maximum viewing angle of 165° to meet the needs of designers who require good colour and light output uniformity in their lighting applications. By delivering flux output of up to 160 lumens at 700 mA, this LED features a maximum allowable junction temperature of 135°C and electrostatic discharge (ESD) resistance of 16 kV; as a result, special ESD protection equipment is not required to handle the part during installation. The LED is compatible with standard SMT reflow soldering processes and has moisture sensitivity level-one (MSL 1) capability.

The wide range of available colours includes red, red-orange, amber, green, blue, royal blue, cool white, neutral white and warm white.

For more information contact Marian Ledgerwood, Future Electronics, +27 (0)21 421 8292, [email protected], www.futureelectronics.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Easy installation panel mount assembly
Future Electronics Enclosures, Racks, Cabinets & Panel Products
NKK’s new easy installation Panel Mount Assembly (the BYB201-470) consists of a PCB, resistor, connector, and a straight PC adaptor.

Read more...
Enhanced breaker status and communication module
Schneider Electric South Africa Opto-Electronics
Schneider Electric has announced the launch of its new Breaker Status and Communication Module (BSCM) Modbus SL/ULP, which delivers enhanced performance, improved connectivity, and simplified integration for power distribution systems.

Read more...
Microchip enhances digital signal controller lineup
Future Electronics DSP, Micros & Memory
Microchip Technology has added the dsPIC33AK512MPS512 and dsPIC33AK512MC510 Digital Signal Controller families to its dsPIC33A DSC product line.

Read more...
Heat-resistant LEDs
Opto-Electronics
Würth Elektronik’s new RGB LEDs are characterised by excellent heat resistance with an insensitivity to temperatures from -40 to 100°C making them ideal solutions for reliable, colour-variable lighting in applications at high operating temperatures.

Read more...
PhotoMOS relays
Future Electronics Opto-Electronics
The AQY221R2SX and AQY221R2S PhotoMOS from Panasonic Industry ensures excellent characteristics and high-speed switching performance.

Read more...
Mouser now shipping onsemi’s image sensors
TRX Electronics Opto-Electronics
The AR0145CS is a 1/4,3-inch CMOS digital image sensor with a 1280 (H) x 800 (V) active-pixel array that can capture both continuous video and single frames.

Read more...
Adaptive optics’ power solution
Altron Arrow Opto-Electronics
Vicor power-dense adaptive optical modules enable colossal telescopes to look into the past for deep space discoveries.

Read more...
Ultra-high speed photo detection
Opto-Electronics
TDK Corporation has announced a photo-spintronic conversion element combining optical, electronic, and magnetic elements that can respond at an ultra-high speed of 20 picoseconds.

Read more...
High-speed lasers
RFiber Solutions Opto-Electronics
Macom are a high-volume manufacturer of lasers, deploying more than 100 million devices with a reliability of less than 50 FIT and greater than 100 years of wear-out lifetime

Read more...
High-performance optical interconnect
Opto-Electronics
STMicroelectronics has unveiled its next generation of proprietary technologies for higher-performing optical interconnect in datacentres and AI clusters.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved