SAW filter for Bluetooth and WiFi

2 September 2009 Circuit & System Protection

Murata has developed a new SAW filter whose high power capability means it can be used as a top filter, replacing two interstage filters with a single component. In addition, the filter’s external matching circuit requires just two inductors.

The SAFEA2G45AC0F00 has a nominal centre frequency of 2450 MHz, suitable for Bluetooth and WiFi systems. Its high power capability means it can be used directly after the power amplifier, replacing two separate interstage filters in the transmit and receive paths. The resulting reduction in component count simplifies the design, lowers cost and saves space.

The filter can handle input signal levels of +27 dBm for 500 hours at up to 85°C, or +24 dBm for 5000 hours at up to 85°C. Voltage standing wave ratio (VSWR) is typically 1,4, with insertion loss typically 1,7 dB. Operating temperature is -30°C to +85°C.

Further reading:

EMC limits and levels
Altron Arrow Editor's Choice Circuit & System Protection
As soon as electronics and electrical systems started interfering with each other, the world had to come to some consensus. Considering physics is universal and does not care about what country electrical/electronic products are used in, it should be the same everywhere, right? It is nearly there, but not quite.

Read more...

---

Clearing the Static: The importance of cleaning in ESD control
Circuit & System Protection
The proper cleaning of ESD-safe areas and equipment such as workstations, floors, mats, trays, and tools using specialised antistatic cleaners is vital to prevent ESD damage.

Read more...

---

Safety relay for explosive areas
IOT Electronics Circuit & System Protection
Phoenix Contact has expanded its safety portfolio with the new PSR-MC35-EXI safety relay module, specifically engineered for use in potentially explosive environments.

Read more...

---

Clearing the Static: Ensuring effective ESD control
Actum Circuit & System Protection
To maintain reliable electrostatic discharge control, regular testing and accurate measurement are essential, with grounding products and ESD testing equipment being vital.

Read more...

---

Clearing the Static: The importance of ESD audits
Actum Circuit & System Protection
An ESD audit is the first step in establishing an effective static control programme in the workplace, and will help identify vulnerable areas and potentially hazardous static zones that require improvement.

Read more...

---

EMI shielding materials application guide
Circuit & System Protection
TE Connectivity’s shielding solutions include electrically conductive elastomers, gaskets, knitted wire mesh, oriented wire, EMI shielding ventilation panels, shielded window, cable shielding and shielding components.

Read more...

---

Clearing the Static: ESD containers and packaging
Actum Circuit & System Protection
         Vacuum forming ESD Electronic components can be damaged by electrostatic discharges. To protect against such damage, electronic assembly parts are often transported or stored in vacuum formed component ...

Read more...

---

Electrostatic discharge chairs
Actum Circuit & System Protection
An ESD chair forms an integral part of grounding within the electrostatic discharge protected area to prevent potential damage to products.

Read more...

---

Conductive ESD footwear
Actum Circuit & System Protection
Conductive ESD footwear is used in conjunction with other grounding devices, such as a wrist strap, cord, and ESD surface mats, to provide a continuous path to ground.

Read more...

---

Clearing the Static: The importance of cleaning in ESD control
Actum Circuit & System Protection
To prevent Electrostatic Discharge (ESD) damage to sensitive electronic assemblies and components, all production, handling, packaging, and storage must take place in an ESD-protected environment.

Read more...

---