Passive Components


Trimming pots cover 10 Ω to 20 kΩ

16 September 2009 Passive Components

Vishay has unveiled two new series of high-precision Accutrim trimming potentiometers. The 3/4-inch rectilinear devices offer low end-to-end TCR of ±5 ppm/°C (1285G) and ±15 ppm/°C (1280G) from –55°C to +125°C, + 25°C reference, and ±25 ppm/°C through the wiper, load life stability of 0,1% under full rated power at +25°C for 2000 hours, and less than 0,05% typical settability.

The 1280G and 1285G trimmers feature a bulk metal foil resistive element that possesses a unique inherent temperature and load life stability. Their advanced, virtually backlash-free (less than 0,05%) adjustment mechanism makes them easy to set quickly and accurately, and maintains that setting through temperature cycling and vibration, as well as thermal and mechanical shock. The devices offer a multifingered, noble metal wiper engaging a planar surface of etched foil for low TCR end-to-end and through the wiper.

The devices feature a 0,1% typical setting stability, a wide resistance range from 10 Ω to 20 kΩ, and resistance tolerances of ±5% (1285G) and ±10% (1280G). They offer a 0,75 W power rating at +25°C and 26 ±2 turn adjustments. For increased reliability, they can withstand electrostatic discharges up to 25 kV.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Accelerate development of physical AI deployments
Altron Arrow DSP, Micros & Memory
With Avocado OS now available on the HummingBoard RZ-V2N- AIoT and SolidSense AIoT V2N from SolidRun, teams can move from prototype to deployed fleet in weeks.

Read more...
SMT flat-wire inductor for automotive electronics
Passive Components
Würth Elektronik introduces its new WE-SFIA series of flat-wire inductors in 2010, 2013, and 2016 packages.

Read more...
Nanocrystalline cores for cable assembly
Passive Components
Conventional MnZn and NiZn ferrite cores for cable assembly are now complemented by nanocrystalline cable cores.

Read more...
Universal NFC device
Altron Arrow DSP, Micros & Memory
Delivering high-end performance in a compact 4 x 4 mm package, the multipurpose NFC reader from ST Microelectronics, enables the convenience of contactless interaction and features for various end applications.

Read more...
Compact direct Time-of-Flight 3D LiDAR module
Altron Arrow AI & ML DSP, Micros & Memory
The VL53L9 from STMicroelectronics is the first direct Time-of-Flight (dToF) 3D LiDAR all-in-one module in ST’s portfolio, offering a resolution of 2,3K zones, wide field of view, on-chip processing, 100 frames per second, and sensing range from 5 centimeters to 9 meters.

Read more...
Heat sinks for power-electronics and IC components
Passive Components
Würth Elektronik introduces heat sinks for power-electronics and IC components.

Read more...
SoC brings scalable edge AI to life
Altron Arrow AI & ML
The NXP i.MX 937 applications processor is optimised for performance without excessive power draw and bridges the gap between entry-level chips and high-end processors.

Read more...
Accelerate STM32-based IoT development with SPI EEPROM board
Altron Arrow Computer/Embedded Technology
ST Microelectronics’ ready-to-use STM32 expansion board helps design more efficient battery-friendly IoT devices based on ultra low power 32-Mbit Page.

Read more...
Compact direct Time-of-Flight 3D LiDAR module
Altron Arrow Opto-Electronics Electronics Technology AI & ML
The VL53L9 from STMicroelectronics is the first direct Time-of-Flight (dToF) 3D LiDAR all-in-one module in ST’s portfolio, offering a resolution of 2,3K zones, wide field of view, on-chip processing, 100 frames per second, and sensing range from 5 centimeters to 9 meters.

Read more...
Cooling solutions for modern electronics
Future Electronics Passive Components
As electronic systems become more compact and powerful, effective thermal management has become a critical aspect of product design.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved