ON Semiconductor has introduced an electrostatic discharge (ESD) protection IC with integrated common mode choke for high-speed data line applications.
The new NUC2401MN combines high bandwidth differential filtering, solid common mode stop band attenuation and enhanced ESD protection. Enabling designers to achieve filtering and protection while realising space and cost savings, it is suitable for a wide variety of applications based on high-speed differential data lines including USB 2.0, IEEE1394, LVDS, MIPI and MDDI.
Integrating the equivalent of five discrete components into a DFN package measuring just 2 x 2,2 mm, the device combines common mode EMI filtering with ESD protection to ±12 – in accordance with the IEC61000-4-2 industry standard for contact discharge. Machine Model (MM) and Human Body Model (HBM) ESD ratings are 1,6 kV and 16 kV respectively. The device is rated to MSL 1 and will operate at temperatures from -40°C to 85°C.
Because the NUC2401MN is an integrated solution, it helps reduce parasitic inductance, resulting in more ideal common mode filtering. The cutoff frequency for common mode noise reduction is 40 MHz and typical common mode impedance at 100 MHz and 500 MHz is 200 Ω and 500 Ω respectively. The device also offers a low maximum clamp voltage of 10 V at a peak current of 5 A. Maximum peak pulse current rating is 19 A.
Compact low-power 32-bit platform EBV Electrolink
DSP, Micros & Memory
Microchip’s PIC32CM PL10 microcontroller family expands the company’s Arm Cortex-M0+ portfolio, delivering a compact, low-power 32-bit platform designed for cost-sensitive embedded applications.
Read more...Edge AI improves condition monitoring EBV Electrolink
AI & ML
STMicroelectronics has introduced the IIS3DWB10IS, an intelligent MEMS vibration sensor designed for high-performance industrial condition monitoring applications.
Read more...EMC limits and levels Altron Arrow
Editor's Choice Circuit & System Protection
As soon as electronics and electrical systems started interfering with each other, the world had to come to some consensus. Considering physics is universal and does not care about what country electrical/electronic products are used in, it should be the same everywhere, right? It is nearly there, but not quite.
Read more...Industrial time-of-flight proximity sensor EBV Electrolink
Opto-Electronics
STMicroelectronics’ VL53L4ED is a compact, high accuracy time-of-flight proximity sensor designed for industrial and embedded applications that require precise short range distance measurement.
Read more...Ultra-low-power smart metering EBV Electrolink
Analogue, Mixed Signal, LSI
ScioSense’s UFC23 sensor combines improved resolution and offset stability with ultra-low standby current, enabling high-end battery-powered water, heat, gas and leak detection meter designs.
Read more...High-performance SSD storage EBV Electrolink
Telecoms, Datacoms, Wireless, IoT
Targeting the performance segment, the new KIOXIA XG10 Series leverages PCIe 5.0 technology to significantly elevate speed and responsiveness across data-intensive client applications.
Read more...Safety relay for explosive areas IOT Electronics
Circuit & System Protection
Phoenix Contact has expanded its safety portfolio with the new PSR-MC35-EXI safety relay module, specifically engineered for use in potentially explosive environments.
Read more...Next-gen robotic systems initiative EBV Electrolink
Design Automation
EBV Elektronik recently introduced MOVE – Driving Robotics Forward, a new initiative designed by EBV Elektronik‘s Embedded Solutions team to support the development of next-generation robotic systems.
Read more...Compact high-current power inductor EBV Electrolink
Passive Components
Vishay’s IHLP series power inductors deliver high current capability in an ultra-low profile, magnetically shielded design.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version