Analogue, Mixed Signal, LSI


High-accuracy voltage references

30 September 2009 Analogue, Mixed Signal, LSI

ON Semiconductor has rolled out its new CAT8900 family of high-accuracy voltage reference ICs. The family combines very high initial accuracy, low supply current consumption and a stable temperature coefficient, to enable precision performance in test equipment and portable, battery-powered data acquisition systems.

The ICs provide initial accuracy as high as 0,02% (±0,5 mV) and a stable, 20 ppm/°C temperature coefficient, while maintaining a low maximum supply current consumption of 800 nA. The family offers nine voltage reference choices: 1024 V, 1200 V, 1250 V, 1800 V, 2048 V, 2500 V, 2600 V, 3000 V and 3300 V. Custom voltages are available on request. Each reference is available in four accuracy grades: ±0,5 mV, ±1,0 mV, ±2,5 mV and ±5,0 mV. The devices source or sink up to 10 mA of load current with as little as 50 mV of dropout. In most applications they do not require an output bypass capacitor.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Compact 6 A automotive buck converter
Altron Arrow Power Electronics / Power Management
Delivering up to 6 A of continuous output current, the DCP0606Y from STMicroelectronics enables efficient regulation of low-voltage rails commonly used in modern vehicle electronics and industrial systems.

Read more...
Next-gen modules for rugged edge AI systems
Altron Arrow Computer/Embedded Technology
Designed for real-world edge deployments where systems do not sit still, SolidRun’s P100 COMx6 series targets mobile platforms as well as harsh, mission-critical environments.

Read more...
NXP has expanded its MCX A Series
Altron Arrow AI & ML
NXP has significantly expanded its MCX A Series of Arm Cortex-M33 microcontrollers, doubling the portfolio with six new families aimed at industrial and IoT edge applications.

Read more...
Surviving the extremes: Understanding shock and vibration in MEMS sensors
Altron Arrow Editor's Choice Test & Measurement
By considering factors such as mechanical headroom, damping, and system-level robustness, designers can ensure that the chosen sensor not only survives, but performs reliably over time.

Read more...
Exploring Bluetooth Channel Sounding
Altron Arrow Telecoms, Datacoms, Wireless, IoT
NXP has enabled BCS on the MCX W72 multi-protocol wireless MCU, which supports Bluetooth Low Energy 6.0, Thread, Zigbee, and Matter.

Read more...
Dual-band Wi-Fi 6 companion module
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The SimpleLink Wi-Fi CC33xx family of devices from Texas Instruments are dual-band Wi-Fi 6 companion modules enabling engineers to connect more applications with confidence.

Read more...
Power module enhances AI data centre power density
Altron Arrow Power Electronics / Power Management
Microchip’s MCPF1525 power module with PMBus delivers 25 A DC-DC power and is stackable up to 200 A.

Read more...
High-performance linear regulator
Altron Arrow Power Electronics / Power Management
The TI TPS7A57-Q1 is an automotive-grade, high-performance low-dropout linear regulator, engineered for precision power delivery in noise-sensitive systems.

Read more...
Quad RF ADC/DAC for wideband transceiver design
Altron Arrow DSP, Micros & Memory
The AD9084 from Analog Devices integrates a quad 16-bit RF digital-to-analogue converter with a maximum sampling rate of 28 GSPS and a quad 12-bit RF analogue-to-digital converter.

Read more...
Collaboration to explore 10BASE-T1S SPE
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The collaboration between Microchip and Hyundai aims to evaluate and promote the adoption of advanced in-vehicle network technologies leveraging each company’s strengths.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved