New 75 V MOSFET family
14 October 2009
Power Electronics / Power Management
The new ‘OptiMOS 3’ 75 V family of MOSFETs from Infineon features low on-state resistances and good switching performance. The low on-state resistance of this small SMD package with current capability of 50 A DC saves board space and ensures enhanced switching behaviour and high efficiency levels.
The IPP 023NE7N3 G delivers RDS(ON) of 2,1 mΩ and a thermal resistance of 0,5 K/W. The BSC 092NE7NS3 G comes in the SuperSO8 package and delivers an RDS(ON) of 3,7 m, enabling highly efficient solutions.
The electrical properties of these devices make them a good choice for a wide range of industrial and consumer applications. Although the technology is optimised for synchronous rectification, other applications such as high-current motor control applications and fast-switching DC-DC converters or class D audio amplifiers can also benefit from the high efficiency levels and low space requirements.
For more information contact EBV Electrolink, +27 (0)21 402 1940, [email protected], www.ebv.com, Electrocomp, +27 (0)11 458 9000, [email protected], www.electrocomp.co.za
Further reading:
4 kW e-mobility DC-DC converter
Brabek
Power Electronics / Power Management
The RECOM RMOD4000 series of compact, plug-and-play DC-DC converters is a cost-effective solution to provide isolated 14 V, 28 V, or 56 V DC network rails from a high input voltage between 180 and 950 V DC.
Read more...
Aluminium case upgrade boosts performance
Vepac Electronics
Power Electronics / Power Management
The SQBF Quarter Brick 300 W DC to DC Converter is now available in a newly upgraded metal case designed to deliver improved durability and superior electrical performance across demanding applications.
Read more...
Extending the range of power converters
RS South Africa
Power Electronics / Power Management
Power Integrations recently announced a breakthrough in flyback topology extending the power range of flyback converters to 440 W - well beyond the limits that traditionally required more complex resonant and LLC topologies.
Read more...
Power-dense modules operate up to 115 V DC
Brabek
Power Electronics / Power Management
The RPMVH-0.5 series of cost-effective, non-isolated buck regulator modules from RECOM delivers 0,5A of output at fully regulated voltages up to 24 V DC.
Read more...
Finding value for money with your IoT battery
Uniross Batteries
Power Electronics / Power Management
Designing an IoT application involves a lot of choices. Designers are looking for performance and quality, but need to balance those alongside a low Total Cost of Ownership.
Read more...
Powering the IoT
Uniross Batteries
Power Electronics / Power Management
Choosing the right battery is not simply a technical detail, but a defining factor in the longevity and cost-effectiveness of any IoT deployment.
Read more...
The move to DC infrastructure
IOT Electronics
Power Electronics / Power Management
The shift toward direct current infrastructure in data centres is accelerating as operators pursue higher efficiency, improved reliability, and stronger alignment with renewable energy goals.
Read more...
Power inductor for automotive applications
Würth Elektronik eiSos
Power Electronics / Power Management
The WE-MXGA inductor features RDC values up to 25% lower and a saturation current up to 47% higher compared to other components currently available on the market.
Read more...
High-performance DC-DC converter
Conical Technologies
Power Electronics / Power Management
With a wide 9 - 40 V DC input range, the Claf Power DWHB400-F24xxN series is a high-performance DC-DC converter family ideally suited for 12 V and 24 V battery-based systems including vehicles, off-grid installations, and distributed power architectures.
Read more...
DC-DC converters for next-generation IoT
iCorp Technologies
Power Electronics / Power Management
AIPUPOWER’s K78XXJT-500R3 and K78XXJT-500R3-LB give designers a compact, high-efficiency power option for battery-powered and space-constrained systems, combining up to 96% efficiency with no-load input current as low as 0,2 mA.
Read more...
printer friendly version