|
|
Low-profile 1500 W power supplies
20 January 2010, Power Electronics / Power Management
XP Power has launched the HPU1K5 1500 W AC-DC power supply series aimed at a broad range of industrial applications that require bulk power within a compact enclosure. Three single-output models are available covering the nominal output voltages of +12, +24 and +48 V d.c., with each being user adjustable either manually or via an external voltage signal. The universal input range covers 85–264 V a.c., with output power up to 1500 W available at high line input and up to 1200 W when using input voltages below 180 V. Using an integral fan, the supply can be mounted either vertically or horizontally and will operate in a wide temperature environment from -20°C up to +50°C at full power, and up to +70°C with derating.
The mechanical design of the HPU1K5 includes a number of innovative design features, such as use of a variable speed fan to keep audible noise to a minimum, and the use of only two internal PCBs. These features aid the optimal flow of air through the unit, helping to maintain a low internal operating temperature and ensuring long-term component reliability. The use of a dual stage power factor correction (PFC) circuit and synchronous rectification techniques contribute to the unit’s 90%-plus power efficiency.
The HPU1K5 can be utilised in current share designs where up to eight of the same output voltage models can share current within 10% of each other at full load. A 5 V/1 A standby rail is standard. Other control lines and signals provide AC OK, DC OK, Inhibit, Enable, Fan Fail and over-temperature indications. Remote sense compensates for up to a 0,5 V drop in the connection cabling. All models have international safety agency approvals and meet the required conducted and radiated noise levels. For more information contact Edwin Brown, Vepac Electronics, +27 (0)11 453 1910, sales@vepac.co.za, www.vepac.co.za |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- 80 V buck driver for LEDs
26 June 2019, Altron Arrow, Power Electronics / Power Management
Infineon Technologies’ new LED driver, the ILD8150/E, features an innovative hybrid dimming mode technology for achieving 0,5 percent of the target current. With its supply voltage range from 8 V up to ...
- AC-DC power supplies for medical devices
26 June 2019, Vepac Electronics, Power Electronics / Power Management
XP Power has announced two new ranges of AC-DC power supplies that provide BF class insulation for healthcare applications where ehnanced EMC performance is a key requirement.
The PBR500 and PBR650 ...
- Better thermal management enabled by advances in semiconductor packaging
26 June 2019, TRX Electronics, Power Electronics / Power Management
Beyond the realm of traditional thermal management solutions, the latest IC packaging technologies are making a significant contribution to satisfying the exacting thermal demands of modern electronic designs.
- Solar-powered bakery developed at UJ
26 June 2019, Power Electronics / Power Management
When used as a tool for community development, the Solar Bread Box becomes a self-sustaining, economy stimulating, job creating and skills development platform.
- Prolonging the life of UPS batteries
26 June 2019, Forbatt SA, Power Electronics / Power Management
The battery is one of the most important parts of an uninterrupted power supply (UPS) system, and is directly related to the reliability of the entire UPS system. Even the most advanced UPS system is ...
- Passive filter design for an ultra-low noise buck regulator
26 June 2019, NuVision Electronics, Power Electronics / Power Management
Switched-mode power supplies (SMPS) have the advantage of high efficiency compared to traditional low-dropout (LDO) regulators. Due to its switching nature, an SMPS emits noise at its switching frequency ...
- How to design AC-DC power supplies for long life
26 June 2019, Accutronics, Power Electronics / Power Management
There are many things that impact the life of a power supply, overstressed components being the main one. All components have a life that is affected by temperature; some components are more strongly ...
- Designing certified power solutions for LED lighting
26 June 2019, Avnet South Africa, Power Electronics / Power Management
LED lighting has become the product of choice in all types of environments, from domestic to industrial through to specialist areas such as stage lighting. The combination of efficiency in terms of lumens ...
- Verotec supplies turnkey enclosure for NMR monitoring
26 June 2019, Vepac Electronics, Enclosures, Racks, Cabinets & Panel Products
TgK Scientific’s InsightXpress new stop-flow delivery pumps enable the screening of reaction conditions by nuclear magnetic resonance (NMR) at an unprecedented speed for industrial and academic scientists ...
- Test point pins
26 June 2019, Vepac Electronics, Interconnection
The range of terminal pins available from Vero Technologies provide an easily useable fitting on a through-hole printed circuit board (PCB) for the attachment of oscilloscope probes, multimeter leads ...
- Three-phase 5 kW power supply
26 June 2019, Vepac Electronics, Power Electronics / Power Management
XP Power’s HPT5K0 series is a range of high power density, high efficiency, resonant zero-voltage switching (ZVS) 5 kW AC-DC power supplies with both ITE/industrial and medical agency approvals that feature ...
- DC-DC converters for 3 to 20 Watts
26 June 2019, Conical Technologies, Power Electronics / Power Management
The new TRI line of DC-DC converters from Traco Power comprises a set of high-isolation, regulated parts which come in a compact DIP-24 package for the 3-10 W units or 5,08 x 2,54 cm for the 15-20 W packages. ...
|
|
