Test & Measurement

Caller ID test set

9 May 2001 Test & Measurement

The ID'R Plus is a caller identification test set from Tempo that identifies over 18 different caller ID formats. It has a simple, one button operation and provides: DC voltage testing; line noise testing; caller ID (CID) testing; visual message waiting indicator (VMWI); caller ID on call waiting (CIDCW).

This test set has many other attractive features including manual or auto off, 30+ hours of continuous use, weather resistant construction, and a high resolution LCD for improved viewing. In addition to delivering the date, time, telephone number, and name (where available), CID also performs tests that indicate excessive noise or the absence of battery.

The unit has dimensions 127 x 81 x 38 mm and weighs 230 g (with battery). Other specs: CAS detect -14 to -32 dBm/tone; CAS reject less than -45 dBm; ACK generation in accordance with SR-TSV-002476 (Type II); CID detect -40 to -10 dBm.


(011) 254 8360

Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Anritsu announce a test solution for PCIe 5.0
Coral-i Solutions Test & Measurement
Granite River Labs and Anritsu Corporation have announced that their jointly developed PCI Express (PCIe) 5.0 automated test solution has been approved by PCI-SIG for “gold suite” product compliance testing.

Connectors for the evolving world of test and measurement
Spectrum Concepts Test & Measurement
Instrumentation employed to test new products needs to become more advanced to keep up with rapidly advancing technology.

Tektronix reimagines performance and portability in oscilloscopes
RS Components (SA) Test & Measurement
The new 2 series of oscilloscope can move from the bench to the field and back, enabling workflows previously not possible.

All-in-one documenting process calibrators
Comtest Test & Measurement
The multifunction calibrators perform sourcing, simulation and measurement of pressure, temperature and electrical signals.

Avoiding safety hazards during solar PV installations
Comtest Test & Measurement
Safety levels during solar panel commissioning and installation have been strengthened by Fluke’s CAT III 1500 V true-RMS clamp meter.

World’s fastest 16-bit arbitrary waveform generator
Vepac Electronics Test & Measurement
The ARB Rider AWG-5000 has a 6,16 GS/s real-time update rate with a 16-bit vertical resolution and is available in two, four or eight channel models.

Modbus probes gain support for parity options
RF Design Test & Measurement
The marquee feature of firmware version 1.06 facilitates the use of odd, even, mark or space parity modes when communicating with bus probes.

Embrace the full power of J-Link debug probes
CST Electronics Test & Measurement
J-Link is supported by all major IDEs, from free Eclipse-based ones up to commercial-grade ones like Segger Embedded Studio.

40 GHz RF power sensor
Conical Technologies Test & Measurement
Mini-Circuits’ PWR-40PW-RC is a USB/Ethernet-controlled power sensor capable of making many different measurements.

Power device analyser
Concilium Technologies Test & Measurement Power Electronics / Power Management
Keysight’s new PD1550A is an advanced double-pulse tester that enables customers to test entire power modules quickly and easily.