Passive Components


High temperature SMD electrolytic capacitor

9 May 2001 Passive Components

In direct response to customers' demand for high specification passive components that can cope with ever-higher temperature ranges whilst remaining reliable, BCcomponents developed the 140 CLH, a new SMD electrolytic capacitor.

The 140 CLH can be used in environments where product reliability must be maintained at temperatures of up to 150°C for short periods (useful life is up to 1500 h at 125°C). Alternatively, the 140 CLH can be used for effective filtering, buffering or smoothing voltages in applications where very long lifetimes at over 10 years at 60°C are required.

As an SMD product, it requires fewer board assembly process steps compared to the equivalent through-hole product. Its high performance in a small case size also means that costs can be reduced by using fewer or smaller capacitors.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Miniature rotary switch series
Electrocomp Switches, Relays & Keypads
The high-quality miniature rotary switch series (MRSS) by TE Connectivity has a compact design which offers 50% lower profile than standard DIP switches.

Read more...
TDK announces robust varistors with 14 mm disk diameter
Electrocomp Passive Components
The new AdvanceD series of varistors have a wide operating voltage range up to 625 V and offer a surge current capability of 3000 A.

Read more...
Angle sensor for safety-critical applications
Altron Arrow Passive Components
TDK’s TAS4240 TMR-based angle-sensor enables precise angle measurements in applications where high performance is needed and space is limited.

Read more...
Compact varistors offer surge capability of 6000 A
Electrocomp Circuit & System Protection
TDK has released the new EPCOS B72314S2* series of leaded disk varistors which cover a wide operating voltage range of 175 VRMS to 625 VRMS.

Read more...
New high current through-hole inductors
EBV Electrolink Passive Components
Vishay has released a high current, through-hole inductor for use in high current and high temperature applications, DC/DC converters, high current differential chokes and inverters.

Read more...
Short body USB-A with no compromise on performance
Electrocomp Interconnection
The all-new USB1125 connector from GCT with a minimal PCB footprint of just 13mm2 is 25% smaller than full-size equivalents.

Read more...
Bourns releases new series of power inductors
Electrocomp Power Electronics / Power Management
Constructed with a magnetic-silica coating to the perimeter of the inductor winding to provide effective shielding, these inductors release lower magnetic field radiation compared to non-shielded inductors.

Read more...
IP68 sealed enclosures from Hammond Manufacturing
Electrocomp Enclosures, Racks, Cabinets & Panel Products
Hammond Manufacturing has introduced the 1551W series, IP68 sealed versions of its popular 1551 miniature enclosure family, in five initial sizes.

Read more...
High performance power inductor in a tiny package
RF Design Passive Components
The LPS4010 series inductors from Coilcraft are low-profile power inductors in a shielded package that offer high energy storage and low DC resistance.

Read more...
New series of power ribbon wire-wound resistors
Electrocomp Power Electronics / Power Management
This QL/QRZG series of high-power resistors have a high-power load up to 2500 W and are suitable for applications such as industrial braking, EV battery packs and charging stations.

Read more...