Industrial colour sensor

17 March 2010 Opto-Electronics

Colour inspection of glossy objects primarily depends on the correct illumination. For example, when light is directed onto an object at a certain angle, the colour detector, apart from sensing the actual colour, also receives influences from the direct reflection of light transmitted by the gloss of the object. This distorts the actual colour of the object and the colours become smoother – red is recognised as pink, blue as bright blue etc.

Sensor Instruments’ SPECTRO 3-DIL colour sensor effectively suppresses the influence of direct reflection by using diffuse light. The result is that colours are detected more clearly and a reliable colour differentiation of different coloured glossy objects is made possible. Up to 31 colour references can be stored in the sensor, and the sensor determines the colour reference that comes closest to the current colour sample. Inspection is performed at a scanning rate of 40 kHz and a switching frequency of the digital outputs of 20 kHz. With its compact M34 aluminium housing and the glass cover of the transmitter and receiver optics, the colour sensor is well suited for rough industrial use.

Further reading:

PhotoMOS relays
Future Electronics Opto-Electronics
The AQY221R2SX and AQY221R2S PhotoMOS from Panasonic Industry ensures excellent characteristics and high-speed switching performance.

Read more...

---

Mouser now shipping onsemi’s image sensors
TRX Electronics Opto-Electronics
The AR0145CS is a 1/4,3-inch CMOS digital image sensor with a 1280 (H) x 800 (V) active-pixel array that can capture both continuous video and single frames.

Read more...

---

Adaptive optics’ power solution
Altron Arrow Opto-Electronics
Vicor power-dense adaptive optical modules enable colossal telescopes to look into the past for deep space discoveries.

Read more...

---

Ultra-high speed photo detection
Opto-Electronics
TDK Corporation has announced a photo-spintronic conversion element combining optical, electronic, and magnetic elements that can respond at an ultra-high speed of 20 picoseconds.

Read more...

---

High-speed lasers
RFiber Solutions Opto-Electronics
Macom are a high-volume manufacturer of lasers, deploying more than 100 million devices with a reliability of less than 50 FIT and greater than 100 years of wear-out lifetime

Read more...

---

High-performance optical interconnect
Opto-Electronics
STMicroelectronics has unveiled its next generation of proprietary technologies for higher-performing optical interconnect in datacentres and AI clusters.

Read more...

---

Halo mid-board optical transceiver
Spectrum Concepts Opto-Electronics
The Samtec Halo mid-board transceiver has been designed for next-generation embedded applications that require 56 and 112 Gbps PAM4 performance in low profile and ruggedised form factors.

Read more...

---

New generation of Ethernet media converters
IOT Electronics Opto-Electronics
Phoenix Contact is introducing three new families of media converters to the market, each designed for specific industrial environments and challenges.

Read more...

---

PIN photodiode with integrated lens
RFiber Solutions Opto-Electronics
The MARP-BP112 from Macom is a backside-illuminated PIN photodiode, usable from 1200 nm to 1650 nm, that is optimised for use in 112 GBaud PAM4 applications.

Read more...

---

RGBIR sensor with I2C interface
Electrocomp Opto-Electronics
Available in a miniature opaque 2,67 x 2,45 mm package, Vishay’s VEML6046X00 includes high-sensitivity photodiodes, a low noise amplifier, and a 16-bit analogue to digital converter.

Read more...

---