Enclosures, Racks, Cabinets & Panel Products


Enclosures conform to CE standard

17 March 2010 Enclosures, Racks, Cabinets & Panel Products

The Arca enclosure line from Fibox consists of 10 standard JIC enclosure sizes ranging from 152 x 152 x 102 mm to 457 x 424 x 250 mm and is available in over 100 configurations of opaque or transparent screw cover or hinged latched cover versions. This size range targets OEM instrumentation, controls and automation applications, and accommodates large components and high-power applications.

The Arca JIC family has been tested and certified by SGS FIMKO to comply with the European community’s low voltage directive and permits use of the CE mark. The enclosures were evaluated against EN 60529 and EN 62262, achieving ingress ratings of IP66/IP67 and an impact rating of IK09. They were also evaluated for mechanical strength (EN 60439-4) and conformity to low voltage switchgear requirements (EN 62208). In addition, they are UL Listed and NEMA rated Type 4, 4X, 12 and 13.

The stylised enclosures, manufactured using injection-moulded polycarbonate, provide ease of customisation, robustness, chemical resistance and wide temperature range.

For more information contact Edwin Brown, Vepac Electronics, +27 (0)11 453 1910, [email protected], www.vepac.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Smallest 13th gen Intel SBC
Vepac Electronics Computer/Embedded Technology
At just 86 x 55 mm, the de next-RAP8 continues AAEON’s run of producing record-breaking single-board computers with embedded Intel technology.

Read more...
Versatile PoE extender
Vepac Electronics Computer/Embedded Technology
The GP-101ET PoE+ Extender is a 1-port Gigabit PoE extender with plug and play installation requiring neither configuration nor extra electrical power.

Read more...
Transporting and storing lithium-ion batteries
Enclosures, Racks, Cabinets & Panel Products
Lithium-ion batteries have become ubiquitous in modern life, but along with their benefits comes a serious challenge: these batteries pose fire and safety risks and are classified as dangerous goods for transport.

Read more...
Non-contact safety door switch
Omron Electronics Enclosures, Racks, Cabinets & Panel Products
OMRON has unveiled its latest innovation in non-contact safety door switches, the D40A-2, designed to enhance workplace safety and streamline machinery operations.

Read more...
Easy installation panel mount assembly
Future Electronics Enclosures, Racks, Cabinets & Panel Products
NKK’s new easy installation Panel Mount Assembly (the BYB201-470) consists of a PCB, resistor, connector, and a straight PC adaptor.

Read more...
Ultra-portable spectrum analyser
Vepac Electronics Test & Measurement
The PXN-400Z from Harogic is a handheld spectrum analyser covering a frequency range of 9 kHz to 40 GHz with a 100 MHz analysis bandwidth.

Read more...
Versatile 3-in-1 instrument
Vepac Electronics Test & Measurement
The ARB Rider AWG-2000 is the cost-effective and powerful two or four channel arbitrary function generator and two or four channel arbitrary waveform generator with advanced sequencer functionality.

Read more...
EEPROMs for industrial and military markets
Vepac Electronics DSP, Micros & Memory
Designed to ensure the data retention and the secure and safe boot of digital systems, the memory product line includes small and medium density EEPROMs from 16 kb to 1 Mb.

Read more...
Multi-channel downconverter
Vepac Electronics Telecoms, Datacoms, Wireless, IoT
The Downconverter from Crane Aerospace is a converter that operates from 2 to 18 GHz and delivers a noise figure of 11 dB with an attenuation range of 25 dB.

Read more...
Wi-Fi dongle supports 5 GHz band
Vepac Electronics Telecoms, Datacoms, Wireless, IoT
The Edimax IEW-7811UTC is a dual-band 802.11ac USB adapter with a USB 2.0 connectivity that enables network connectivity with high-speed rates of up to 433 Mbps.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved