Pyroelectric infrared sensor
17 March 2010
Opto-Electronics
The latest version of Murata’s pyroelectric infrared (PIR) sensor is claimed to be the world’s smallest at just 5,0 x 4,7 x 2,4 mm, enabling its use in compact, low-profile electronic devices and equipment. The surface-mount IRS-B210ST01-R1 features high sensitivity and signal to noise ratio, excellent stability against temperature changes, and white light and enhanced RFI immunity.
The IRS-B210ST01-R1 series is suitable for person detection for security and proximity sensing applications, since it detects infrared at the wavelength emitted by the human body. Its small package size makes it suitable for consumer devices. The device features dual 0,85 x 1,2 mm electrodes with a field of vision of ±70° (horizontal) and ±50° (vertical). Its operating temperature range is -40°C to +70°C and the device is driven by a supply voltage in the range of 2 to 15 V.
Further reading:
PhotoMOS relays
Future Electronics
Opto-Electronics
The AQY221R2SX and AQY221R2S PhotoMOS from Panasonic Industry ensures excellent characteristics and high-speed switching performance.
Read more...
Mouser now shipping onsemi’s image sensors
TRX Electronics
Opto-Electronics
The AR0145CS is a 1/4,3-inch CMOS digital image sensor with a 1280 (H) x 800 (V) active-pixel array that can capture both continuous video and single frames.
Read more...
Adaptive optics’ power solution
Altron Arrow
Opto-Electronics
Vicor power-dense adaptive optical modules enable colossal telescopes to look into the past for deep space discoveries.
Read more...
Ultra-high speed photo detection
Opto-Electronics
TDK Corporation has announced a photo-spintronic conversion element combining optical, electronic, and magnetic elements that can respond at an ultra-high speed of 20 picoseconds.
Read more...
High-speed lasers
RFiber Solutions
Opto-Electronics
Macom are a high-volume manufacturer of lasers, deploying more than 100 million devices with a reliability of less than 50 FIT and greater than 100 years of wear-out lifetime
Read more...
High-performance optical interconnect
Opto-Electronics
STMicroelectronics has unveiled its next generation of proprietary technologies for higher-performing optical interconnect in datacentres and AI clusters.
Read more...
Halo mid-board optical transceiver
Spectrum Concepts
Opto-Electronics
The Samtec Halo mid-board transceiver has been designed for next-generation embedded applications that require 56 and 112 Gbps PAM4 performance in low profile and ruggedised form factors.
Read more...
New generation of Ethernet media converters
IOT Electronics
Opto-Electronics
Phoenix Contact is introducing three new families of media converters to the market, each designed for specific industrial environments and challenges.
Read more...
PIN photodiode with integrated lens
RFiber Solutions
Opto-Electronics
The MARP-BP112 from Macom is a backside-illuminated PIN photodiode, usable from 1200 nm to 1650 nm, that is optimised for use in 112 GBaud PAM4 applications.
Read more...
RGBIR sensor with I2C interface
Electrocomp
Opto-Electronics
Available in a miniature opaque 2,67 x 2,45 mm package, Vishay’s VEML6046X00 includes high-sensitivity photodiodes, a low noise amplifier, and a 16-bit analogue to digital converter.
Read more...