The MA 2112 from Ingun is an evolutionary development of the successful MA 2110, incorporating advances in contact force, intermediate interface and ergonomics.
The contact force of the new test fixture achieves a level that is usually only achieved with a vacuum fixture – with a contact force of 2 N, up to 1330 test probes (1,5 N) can be assembled. The integrated high-grade intermediate interface can transfer up to 1190 Signals when fully loaded, and can also be loaded with up to seven interface pin blocks.
The interchangeable kits can be exchanged with very little effort and the probe plate unit can be locked and unlocked with a small hand lever at the front. The pressure frame plate is equipped with a patented quick-lock lever, which enables exchange in just a few seconds. For easy storage, the pressure frame plate and the probe plate unit can be connected up to one unit, which allows stacking. The test fixture’s overall dimensions are 460 x 480 x 265 mm, with a usable area of 295 x 250 mm. It accommodates printed circuit boards up to 60 mm, while for higher components the pressure frame plate can be milled out.
High-speed AWG generates up to 20 sine waves Vepac Electronics
Test & Measurement
Spectrum Instrumentation has released a new firmware option for its range of versatile 16-bit Arbitrary Waveform Generators, with sampling rates up to 1,25 GS/s and bandwidths up to 400 MHz.
Read more...Multi-head battery contacting solutions Electronic Industry Supplies
Interconnection
INGUN has developed contacting solutions which boast low contact resistances, maximum reduced power losses, and stable, durable electrical connections in either single- or multi-head contacting configurations.
Read more...Digitisers upgraded with pulse generator option Vepac Electronics
Test & Measurement
Spectrum Instrumentation has added the Digital Pulse Generator option to its ultrafast digitisers (with up to 10 GS/s speed) and arbitrary waveform generators.
Read more...Companies collaborate on EnviroMeter Avnet Silica
Test & Measurement
STMicroelectronics and Mobile Physics have joined forces to create EnviroMeter for accurate air-quality monitoring on smartphones. Time-of-flight optical sensing enables an accurate personal air quality monitor and smoke detector.
Read more...PCB test points Vepac Electronics
Test & Measurement
Maintaining these access points in the final production versions will prove invaluable during the life of the equipment for service, adjustment, and debug, or repair activities.
Read more...White residues on the assembly Electronic Industry Supplies
Manufacturing / Production Technology, Hardware & Services
When white residues suddenly appear on assemblies for unknown reasons, the customer is often confused – and the first idea is often the same: something must be wrong with the cleaner. But this is only the cause in extremely rare cases.
Read more...RFID reader
Test & Measurement
The EXA81 from Brady turns any smartphone or tablet into a personal radar that can pick up radio signals from all RFID-labelled items.
Read more...Automated test jig Electronic Industry Supplies
Manufacturing / Production Technology, Hardware & Services
The system consists of a 12 V geared motor, which drives a toothed segment of the drive unit’s coupling via a gear, providing a contact force of up to 1000 N and a service life of up to 500 000 load cycles.