Power Innovations' TISPPBL programmable telecom surge protectors provide an assured route to international standards compliance for designers using Ericsson PBL3xxx series SLICs, backed by the endorsement of the SLIC manufacturer. The Ericsson SLICs not only have a voltage specification, but also require a complex voltage/time protection envelope. The TISPPBL protectors are guaranteed to be within this profile, greatly simplifying the design task for more than 25 different Ericsson PBL3xxx SLICs. The TISPPBL is rated across the complete voltage range of the SLIC, right up to 90 V.
The TISPPBL is available in SMD and through-hole packages, both offering convenient dual pin connections for the protected lines, optimised for correct in-line PCB layout. Comprehensive data is provided, detailing compliance with 100 A 2/10 ms GR-1089-CORE, 100 A 1,2/50 ms ITU-T K22 and a range of other International standards including K20, K21 and 13124. Since the TISPPBL is programmed by reference to the actual battery voltage, it automatically provides minimum stress to the SLIC, no matter what the supply voltage is.
With longer subscriber lines requiring higher current/higher voltage ringing signals, PI has used its specialised high voltage bipolar process to produce two models: the TISPPBL1, optimised for standard applications; and the TISPPBL2 which is rated for programmed line currents above 60 mA.
By using PI's high power integration capabilities, the TISPPBL not only combines pairs of high current diodes and thyristors on one chip, it also incorporates two high voltage, high gain buffer transistors to minimise the supply loading and prevent the charging of the SLIC power supply, which unbuffered protectors can generate, and which can lead to SLIC damage.
More room to scale Altron Arrow
Power Electronics / Power Management
With the latest STM32H5 lines from STMicroelectronics, you can now scale within the same platform, from a compact 1 Mbyte device to higher-memory MCUs for graphics-rich and feature-heavy designs.
Read more...Multi-constellation GNSS module in a legacy-compatible footprint Altron Arrow
Telecoms, Datacoms, Wireless, IoT
Telit Cinterion has announced the SE869eK2L, a single-frequency L1 GNSS module designed to help device manufacturers upgrade legacy positioning designs with improved performance and cost efficiency, while preserving design continuity.
Read more...Compact SSI family for industrial automation Altron Arrow
Passive Components
Infineon Technologies has introduced the ISSI20BxxF Solid State Isolator (SSI) family, bringing solid-state isolation technology into high-volume applications traditionally served by photovoltaic isolators (PVIs), photovoltaic relays (PVRs), and electromechanical relays (EMRs).
Read more...Rev 2.0 PolarFire FPGA ethernet sensor bridge Altron Arrow
Computer/Embedded Technology
Smaller, multi-camera platform enables scalable Ethernet architectures for NVIDIA Edge AI systems, while lowering power, cost and integration complexity.
Read more...The effect of seasonal changes on ESD performance in South Africa Actum
Editor's Choice Circuit & System Protection Manufacturing / Production Technology, Hardware & Services
Electrostatic discharge performance is influenced by several environmental factors, with relative humidity being one of the most important. This is particularly relevant in South Africa, where seasonal changes can result in significant differences in humidity levels.
Read more...Universal IR receiver module Altron Arrow
Telecoms, Datacoms, Wireless, IoT
Vishay Intertechnology has introduced a new series of infrared (IR) receiver modules for IR remote control applications, which feature a wide modulation frequency acceptance from 30 kHz to 68 kHz.
Read more...Low profile SMD antenna Altron Arrow
Telecoms, Datacoms, Wireless, IoT
The Havok PCS.06.A antenna, from Taoglas, is a low profile SMD LTE/cellular 4G/3G/2G embedded antenna designed for direct SMD mount on a device PCB.
Read more...Accelerate development of physical AI deployments Altron Arrow
DSP, Micros & Memory
With Avocado OS now available on the HummingBoard RZ-V2N-
AIoT and SolidSense AIoT V2N from SolidRun, teams can move from prototype to deployed fleet in weeks.
Read more...Universal NFC device Altron Arrow
DSP, Micros & Memory
Delivering high-end performance in a compact 4 x 4 mm package, the multipurpose NFC reader from ST Microelectronics, enables the convenience of contactless interaction and features for various end applications.
Read more...Compact direct Time-of-Flight 3D LiDAR module Altron Arrow
AI & ML DSP, Micros & Memory
The VL53L9 from STMicroelectronics is the first direct Time-of-Flight (dToF) 3D LiDAR all-in-one module in ST’s portfolio, offering a resolution of 2,3K zones, wide field of view, on-chip processing, 100 frames per second, and sensing range from 5 centimeters to 9 meters.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version