Supertex recently introduced the HV9963, a closed-loop LED driver IC with pulse width modulated (PWM) dimming capability designed to optimise LED performance and efficiency and extend LED life.
The IC is optimised for DC/DC applications such as RGB or white LED backlighting, LCD TVs and monitors, and LED lamps for general lighting.
The driver utilises a closed-loop system to control the current going to the LED string, which is an active, real-time system that continuously monitors the LED current via sense resistors. The HV9963 includes a 1 MHz transconductance amplifier with a tri-state output, which closes feedback loops in the sensing process and provides accurate current control. It can be synchronised in applications requiring multiple LED drivers to prevent the system sub-harmonic oscillations that are often associated with driving multiple driver schemes.
The HV9963 also features hiccup mode protection for both short- and open-circuit conditions, and a high PWM dimming ratio. It operates in a constant frequency mode for use in a variety of converter topologies such as buck, boost and SEPIC. The IC is available in a 16-lead SOIC package that is RoHS compliant.
PhotoMOS relays Future Electronics
Opto-Electronics
The AQY221R2SX and AQY221R2S PhotoMOS from Panasonic Industry ensures excellent characteristics and high-speed switching performance.
Read more...Mouser now shipping onsemi’s image sensors TRX Electronics
Opto-Electronics
The AR0145CS is a 1/4,3-inch CMOS digital image sensor with a 1280 (H) x 800 (V) active-pixel array that can capture both continuous video and single frames.
Read more...Adaptive optics’ power solution Altron Arrow
Opto-Electronics
Vicor power-dense adaptive optical modules enable colossal telescopes to look into the past for deep space discoveries.
Read more...Ultra-high speed photo detection
Opto-Electronics
TDK Corporation has announced a photo-spintronic conversion element combining optical, electronic, and magnetic elements that can respond at an ultra-high speed of 20 picoseconds.
Read more...High-speed lasers RFiber Solutions
Opto-Electronics
Macom are a high-volume manufacturer of lasers, deploying more than 100 million devices with a reliability of less than 50 FIT and greater than 100 years of wear-out lifetime
Read more...High-performance optical interconnect
Opto-Electronics
STMicroelectronics has unveiled its next generation of proprietary technologies for higher-performing optical interconnect in datacentres and AI clusters.
Read more...Halo mid-board optical transceiver Spectrum Concepts
Opto-Electronics
The Samtec Halo mid-board transceiver has been designed for next-generation embedded applications that require 56 and 112 Gbps PAM4 performance in low profile and ruggedised form factors.
Read more...New generation of Ethernet media converters IOT Electronics
Opto-Electronics
Phoenix Contact is introducing three new families of media converters to the market, each designed for specific industrial environments and challenges.
Read more...PIN photodiode with integrated lens RFiber Solutions
Opto-Electronics
The MARP-BP112 from Macom is a backside-illuminated PIN photodiode, usable from 1200 nm to 1650 nm, that is optimised for use in 112 GBaud PAM4 applications.
Read more...RGBIR sensor with I2C interface Electrocomp
Opto-Electronics
Available in a miniature opaque 2,67 x 2,45 mm package, Vishay’s VEML6046X00 includes high-sensitivity photodiodes, a low noise amplifier, and a 16-bit analogue to digital converter.
printer friendly version