Analogue, Mixed Signal, LSI


Microprocessor supervisor IC

14 April 2010 Analogue, Mixed Signal, LSI

Monolithic Power Systems’ MP6401 is a microprocessor supervisor IC combining a low-dropout (LDO) linear regulator with an integrated reset circuit. It operates from a 2,5 V to 5,5 V input voltage and regulates the output voltage with 2% accuracy at 1,8 V, 2,5 V, 3,3 V or an adjustable value from 1,229 V to 5 V. The device delivers up to 300 mA load current and consumes a quiescent current of 80 μA.

The MP6401 provides a push-pull, active-low output that asserts when the regulator output voltage drops below the microprocessor supply threshold (-7,5% or -12,5% of nominal output voltage). Four reset delay times – 3,125 ms, 25 ms, 200 ms and 1580 ms – can be selected. The IC is available in 3 x 3 mm TQFN8, 2 x 2 mm TQFN6 and TSOT packages and is specified for operation from -40°C to 85°C. Protection features include reverse current, thermal and short circuit.

For more information contact Gary de Klerk, NuVision Electronics, +27 (0)11 894 8214, gdeklerk@nuvisionelec.co.za, www.nuvisionelec.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Secure, low-power Bluetooth LE SoC
NuVision Electronics Telecoms, Datacoms, Wireless, IoT
Silicon Labs unveils BG2B, its lowest-power Bluetooth LE SoC with industry-leading power efficiency, security, and integration.

Read more...
Pickering Expands Analogue Output Portfolio
Analogue, Mixed Signal, LSI
Whether you are building a functional tester for the production line or an HIL test system, Pickering’s instrumentation offering delivers high channel density, reliable precision, and dependable long-term support

Read more...
Java Card-based solution
Future Electronics Analogue, Mixed Signal, LSI
The SECORA ID Key S USB, from Infineon Technologies, is a Java Card-based solution with USB and NFC connectivity for secured authentication and digital signatures.

Read more...
GigaDevice expands optical communication portfolio
NuVision Electronics Telecoms, Datacoms, Wireless, IoT
GigaDevice has introduced the new GD32E512 and GD32E252 series MCUs specifically designed for optical module applications.

Read more...
GigaDevice expands optical communication portfolio
NuVision Electronics Telecoms, Datacoms, Wireless, IoT
GigaDevice has introduced the new GD32E512 and GD32E252 series MCUs specifically designed for optical module applications.

Read more...
Digital isolators for I2C interfaces
Analogue, Mixed Signal, LSI
Würth Elektronik has expanded its range of digital isolators with 2-channel bidirectional isolators for I2C communication interfaces.

Read more...
Ultra-low-power smart metering
EBV Electrolink Analogue, Mixed Signal, LSI
ScioSense’s UFC23 sensor combines improved resolution and offset stability with ultra-low standby current, enabling high-end battery-powered water, heat, gas and leak detection meter designs.

Read more...
Industrial vibration sensing simplified
Altron Arrow Analogue, Mixed Signal, LSI
The IIS3DWBG1 from STMicroelectronics is a high performance, three-axis digital vibration sensor engineered for demanding industrial applications where accurate motion monitoring is essential.

Read more...
Understanding two key tools for cleaner serial data
Altron Arrow Editor's Choice Analogue, Mixed Signal, LSI
Understanding how pre-emphasis and equalisation works, and when to use one over the other, is critical when designing reliable high-speed systems.

Read more...
GigaDevice expands GD25UF Series density
NuVision Electronics DSP, Micros & Memory
GigaDevice has announced the expanded density range of its GD25UF series 1,2 V ultra-low power SPI NOR Flash, now spanning from 8 Mb to 256 Mb.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved