mobile | classic
Dataweek Electronics & Communications Technology Magazine





Follow us on:
Follow us on Facebook Share via Twitter Share via LinkedIn


Search...

Electronics Buyers' Guide

Electronics Manufacturing & Production Handbook 2019


 

ESD protection for HB LEDs
28 April 2010, Circuit & System Protection

California Micro Devices has added two new members to its LuxGuard family of high brightness LED (HB LED) ESD protection devices. The CM1753 and CM1754 are ideally suited for providing ESD protection on high-power HB LED applications, providing up to ±8 kV contact discharge protection, per the MIL-STD-883 standard. These devices feature almost zero conduction at signal amplitudes of 45 V, and are packaged as silicon-based side-mounts suitable for applications including existing HBLED lamp modules.

The CM1753 is designed for P-up common cathode configurations while the CM1754 provides identical protection for N-up common anode configurations. Due to their tiny package size, these devices can be attached via a single wirebond, which permits their use in high-density applications with strings of one to 15 LEDs.


Credit(s)
Supplied By: MB Silicon Systems
Tel: +27 11 728 4757
Fax: 086 633 4903
Email: info@mbsiliconsystems.co.za
www: www.mbsiliconsystems.co.za
  Share on Facebook Share via Twitter Share via LinkedIn    

Further reading:

  • EMI compliance testing vs. pre-compliance testing
    25 September 2019, Concilium Technologies, Circuit & System Protection
    Electromagnetic interference (EMI) is caused by unintentional emissions from electronic equipment. Compared to natural sources of EMI, such as lightning and solar storms, engineers are more concerned ...
  • X-capacitor discharge ICs
    25 September 2019, MB Silicon Systems, Power Electronics / Power Management
    Power Integrations announced CAPZero-3, the latest generation of the company’s energy-saving X-capacitor discharge ICs. Two-terminal CAPZero-3 ICs enable designers to meet IEC60335 safety approvals for ...
  • Conductive rubber gaskets
    25 September 2019, Conical Technologies, Circuit & System Protection
    A range of conductive O-profile silicone rubber gaskets is available from Holland Shielding Systems, developed for high-performance shielding up to 18 GHz and used where environmental and EMI screening ...
  • High-temperature TVS MLVs
    25 September 2019, Future Electronics, Circuit & System Protection
    The new TransGuard VT Series multilayer varistors (MLV) made by AVX are rated for transient voltage suppression (TVS) applications operating at very high temperatures. They provide reliable, bidirectional ...
  • Test unit controls access to ESD protected areas
    25 September 2019, Altico Static Control Solutions, Circuit & System Protection
    In the electronics manufacturing industry, an electrostatic discharge (ESD) can cause irreparable damage to electronic components. This micro-lightning bolt can burn holes through insulating layers and ...
  • EMI AC line filters for avionics
    31 July 2019, Conical Technologies, Circuit & System Protection
    Part of the AeroQor range, SynQor’s latest EMI AC line filters bring the company’s technology and manufacturing expertise to the avionics COTS component marketplace. The components’ packaging ensures ...
  • Conductive rubber gaskets
    31 July 2019, Conical Technologies, Circuit & System Protection
    A range of conductive O-profile silicone rubber gaskets is available from Holland Shielding Systems, developed for high-performance shielding up to 18 GHz and used where environmental and EMI screening ...
  • High-speed fuses to protect critical power electronics
    31 July 2019, Altron Arrow, Circuit & System Protection
    Littelfuse high-speed (semiconductor) fuses protect critical power electronics from over-currents that may cause damage to electronic equipment. The company’s high-speed fuses are reliable, very fast-acting ...
  • Vent panels for increased airflow and EMI protection
    26 June 2019, Actum Electronics, Circuit & System Protection
    Vent panels made by Laird Technologies offer effective ventilation within electronic equipment, while upholding signal integrity of the enclosure. Its MaxAir and ElectroVent solutions consist of layered, ...
  • High-speed fuses to protect critical power electronics
    26 June 2019, Altron Arrow, Circuit & System Protection
    Littelfuse high-speed (semiconductor) fuses protect critical power electronics from over-currents that may cause damage to electronic equipment. The company’s high-speed fuses are reliable, very fast-acting ...
  • PPTC resettable fuses
    29 May 2019, Electrocomp, Circuit & System Protection
    The Bourns Multifuse product line has added the new 8 V and 6 V rated Model MF-FSML/X series of low-resistance, surface-mount polymer positive temperature coefficient (PPTC) resettable fuses. The new ...
  • High-power resettable fuses
    29 May 2019, Electrocomp, Circuit & System Protection
    Bourns has introduced its new 3425 (8764 metric) size, surface-mount MF-GSMF series of Multifuse polymer PTC resettable fuses, beginning with model MF-GSMF300/36X-2. The initial model has higher voltage ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronics Buyers’ Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    Classic | Mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.