mobile | classic
Dataweek Electronics & Communications Technology Magazine





Follow us on:
Follow us on Facebook Share via Twitter Share via LinkedIn


Search...

Electronics Buyers' Guide

Electronics Manufacturing & Production Handbook 2019


 

CANbus connectors
26 May 2010, Interconnection

ERNI Electronics’ new ERbic CANbus connectors benefit from the latest ERNI Type 8 D-Sub connector generation offering high precision, stability and contact reliability. Housing dimensions have also been reduced to produce a compact design with a reduced form factor.

All enclosed parts are preassembled with only one mounting screw. The new connectors are very flexible due to a spring clamp terminal and an exchangeable cable strain relief for cable diameters from 6–9 mm (8 mm premounted, 7 mm enclosed). The connectors offer a connectable termination resistor, which can be activated externally, and an optional diagnostic interface. An extra metallic stamped shield connection provides an optimal shield contact. The bus connectors can be imprinted using the standard ID plate.

The CANBus devices need only a standard screwdriver for assembly/disassembly and provide visibility of switch status due to the red colour of the actuation lever. There is a large area for custom labelling, while neutral versions and variants with custom company logo can be supplied. The connectors are designed for data rates up to 1 Mbps in applications according to the CANbus specification. The connectors with protection class IP20 are specified to operate in the temperature range from -20°C to +70°C.


Credit(s)
Supplied By: Actum Electronics
Tel: +27 11 608 3001
Fax: +27 11 608 1918
Email: sales@actum.co.za
www: www.actum.co.za
  Share on Facebook Share via Twitter Share via LinkedIn    

Further reading:

  • RF coaxial IDC connectors
    28 August 2019, Future Electronics, Interconnection
    AVX has released new wire-to-board RF coaxial IDC connectors for industrial and automotive applications. The initial release of the new 00-6791 Series is comprised of two small, single-piece solutions ...
  • Sealed plastic connectors
    28 August 2019, TRX Electronics, Interconnection
    The UTL series from Souriau is a plastic connector suitable for outdoor industrial applications thanks to a high sealing performance (IP68/IP69K) and an extreme UV resistance with F1 material per UL746C. ...
  • Digital workflow eases selection of Schroff products
    28 August 2019, Actum Electronics, Enclosures, Racks, Cabinets & Panel Products
    nVent Schroff has a series of coordinated services that simplify and speed up the digital workflow from selection to delivery of Schroff products. Now when users search for products on https://schroff.nvent.com/...
  • Waveguide to coax adaptors
    31 July 2019, RF Design, Interconnection
    Pasternack has launched a new series of waveguide to coax adapters for use in 5G, telecommunications, automotive radar, satellite communications, point-to-point radio, and terrestrial communications applications. The ...
  • SMT test points and terminal pins
    31 July 2019, Vepac Electronics, Interconnection
    Vero Technologies, a leading manufacturer of test points and terminal pins in the PTH (plated through-hole) space, has a complementary range of SMT devices suitable for use with high-speed placement machines. ...
  • Modular fibre-optic patch panel
    31 July 2019, Webb Industries, Interconnection
    The latest from Webb Industries is Telegärtner’s Fibre Termination Box (FTB) – a modular fibre-optic patch panel system which facilitates customised cabling in locations where large numbers of apartments ...
  • Subrack configuration software
    31 July 2019, Actum Electronics, Design Automation
    Schroff has launched the EuropacPRO Subrack Configurator, an intelligent online design tool that enables users to configure individual EuropacPRO subracks for vertically-installed applications. This ...
  • Vent panels for increased airflow and EMI protection
    26 June 2019, Actum Electronics, Circuit & System Protection
    Vent panels made by Laird Technologies offer effective ventilation within electronic equipment, while upholding signal integrity of the enclosure. Its MaxAir and ElectroVent solutions consist of layered, ...
  • Compression lugs and splices
    26 June 2019, TRX Electronics, Interconnection
    Panduit Pan-Lug compression connectors provide permanent terminations for a variety of power and grounding applications. The connectors are designed for use with many different code and flex conductor ...
  • Test point pins
    26 June 2019, Vepac Electronics, Interconnection
    The range of terminal pins available from Vero Technologies provide an easily useable fitting on a through-hole printed circuit board (PCB) for the attachment of oscilloscope probes, multimeter leads ...
  • Pin strips for KNX applications
    26 June 2019, Wiltron Agencies, Interconnection
    The pins of the STL190 through-hole pin strips were designed by PTR specifically for KNX applications in home, building and system technology. Positioned by means of a carrier pad at a spacing clearance ...
  • High-temperature FFC/FPC connectors
    26 June 2019, Otto Marketing, Interconnection
    Hirose Electric’s new FH52K series of robust flat flexible cable/flat printed circuit (FFC/FPC) connectors are designed to withstand higher operating temperatures than standard FFC/FPC connectors. The ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronics Buyers’ Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    Classic | Mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.