Telecoms, Datacoms, Wireless, IoT


Optical networking platform

23 June 2010 Telecoms, Datacoms, Wireless, IoT

Transition Networks announced the introduction of the ION platform, a new family of intelligent optical networking devices built to meet the increasing demand of today’s networks in terms of manageability and security. At the core of the platform is a 2U 19-inch rack mountable chassis that is designed to house up to 19 slide-in conversion modules along with two power supply modules, with all slots being hot-swappable.

A typical application would include the ION chassis, an ION management module and a redundant power supply. A variety of Fast Ethernet and Gigabit Ethernet fibre conversion modules are also available to meet customers’ specific network requirements. The faceplates on the slide-in modules have a brushed nickel finish that provides a durable service life while still being RoHS compliant.

The management module allows users to remotely monitor the current operating status of each slide-in module. Each module has an extensive set of features and functions that can be controlled. A network administrator can securely configure, monitor and troubleshoot ION slide-in-modules remotely through a Web browser, a command line interface (CLI), via telnet or with a third party SNMP application. Each slot in the ION chassis is numbered, so users can quickly identify individual cards after monitoring them through the management interface. Secure access control to the management module is provided by support for management VLAN, SSH, SSL, 802.1x. and SNMP v1 and v2.

The power supply modules are fully manageable. Both 100-240 V a.c. and -48 V d.c. power supplies are available. While only one power supply is needed to power a fully loaded ION chassis, the option of a second power supply offers redundancy by functioning in an instant fail-over mode of operation. Power supply status LEDs are mounted on the frame of the chassis to provide at-a-glance information while keeping the slots free for conversion modules.

For more information contact DataNet Infrastructure Group, 0861 DATANET, info@datanet.co.za, www.datanet.co.za





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Macom targets broadband radar with time delay MMIC
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
Macom’s MADU FR1012 is a GaAs MMIC 1-bit true time delay device covering 4 GHz to 12 GHz, designed for broadband microwave systems where beam accuracy and signal integrity are critical.

Read more...
Compact analogue phase shifter
RF Design Telecoms, Datacoms, Wireless, IoT
The Mini-Circuits JSPHS-150+ is a compact analogue voltage-controlled phase shifter designed for narrowband RF applications between 100 and 150 MHz.

Read more...
Wireless connectivity expanded
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Espressif Systems has introduced two new members of its ESP32 wireless SoC family: the ESP32-E22, the company’s first Wi-Fi 6E connectivity chip, and the ESP32-H21, an ultra-low-power Bluetooth LE microcontroller aimed at coin-cell and battery-powered devices.

Read more...
Integrated X-band radar front-end module
RF Design Telecoms, Datacoms, Wireless, IoT
Qorvo has introduced an X-band radar front-end solution that enables defence system designers to achieve higher performance without increasing size, weight or prime power.

Read more...
Introducing Aurata
CST Electronics Telecoms, Datacoms, Wireless, IoT
Antenova has launched Aurata SR4L112: a compact, high efficiency embedded 4G/LTE antenna engineered for long, narrow PCB designs.

Read more...
Multi-constellation GNSS module in a legacy-compatible footprint
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Telit Cinterion has announced the SE869eK2L, a single-frequency L1 GNSS module designed to help device manufacturers upgrade legacy positioning designs with improved performance and cost efficiency, while preserving design continuity.

Read more...
Quectel expands 5G portfolio
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Quectel expands 5G portfolio with new Qualcomm- and UNISOC-based modules.

Read more...
Compact RTK design: More than just the receiver
iCorp Technologies Editor's Choice Telecoms, Datacoms, Wireless, IoT
In practice, engineers building compact RTK products keep discovering the same thing: the hardest component in the system is no longer the receiver. It is the antenna.

Read more...
Microchip advances Space-Grade timing performance
ASIC Design Services Telecoms, Datacoms, Wireless, IoT
Microchip Technology has expanded its atomic clock portfolio with the radiation-tolerant Space CSAC-SA65, a Chip Scale Atomic Clock designed to deliver precise timing for space systems.

Read more...
Channel emulator for 6 G and Wi-Fi 7/8
Concilium Technologies Telecoms, Datacoms, Wireless, IoT
With 400 MHz instantaneous bandwidth and support for carrier frequencies up to 23,6 GHz, Vertex 6.0 is the industry’s first channel emulator designed for next generation 6 G and Wi-Fi 7/8 testing.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved