Mean Well has expanded its AC/DC battery charger line with the introduction of the 160 W GC160 series. With no-load power consumption less than 1 W and efficiency up to 94%, the units save energy in both standby and active modes. Featuring two-stage fast charging characteristics, the GC160 series is suitable for all kinds of batteries, such as lead-acid, Lithium-Mn (LiMnO2), Lithium-Fe battery (LiFePO4) and sealed lead-acid gel.
The chargers possess a two-stage charging curve (constant current and constant voltage) and can monitor the battery capacity by detecting the battery voltage. They can quickly charge the battery in constant current mode in a low battery capacity status and then, when the battery bank becomes full, the charger can automatically resort to constant voltage mode with low charging current to avoid lifetime reduction caused by over-charging.
Using the standard IEC320-C14 inlet as the input connector, the GC160 series is equipped with an earth ground pin and enclosed in a UL 94V-0 rated plastic case. These Class I units can effectively prevent users from electrical shock and are suitable for charging electric scooters, electric bikes and electric wheelchairs. Featuring 85–264 V a.c. full range input and active PFC function, the power supplies comply with the harmonic requirements of EN61000-3-2. Standard features include two-colour LED indicator for charging status, as well as short circuit, over-voltage and over-temperature protections. The chargers boast global safety/EMC certificates per UL, TUV, CB, FCC and CE which guarantees safety for charging applications such as household appliance, security systems, leisure vehicles and office/commercial equipment.
High-precision current transducer
Power Electronics / Power Management
Danisense announces its new high-precision DP12IP current transducer designed for isolated DC and AC current measurement in demanding PCB-mounted power electronics applications.
Read more...Secure holder for protected 18650 batteries
Power Electronics / Power Management
Designed for protected 18650 batteries up to 70 mm long, the holder offers secure retention for portable, industrial, and embedded applications.
Read more...More room to scale Altron Arrow
Power Electronics / Power Management
With the latest STM32H5 lines from STMicroelectronics, you can now scale within the same platform, from a compact 1 Mbyte device to higher-memory MCUs for graphics-rich and feature-heavy designs.
Read more...Surface mount power amplifier for high-power applications RF Design
Power Electronics / Power Management
The GNA-63-5W+, from Mini-Circuits, is a GaN MMIC Power Amplifier (PA) designed for demanding RF applications requiring high efficiency, excellent linearity, and a compact footprint.
Read more...1200 V QSiC modules
Power Electronics / Power Management
SemiQ Inc has launched the QSiC Dual3, a family of 1200 V half-bridge MOSFET modules for motor drives in data centre cooling systems, grid converters in energy storage systems, and industrial drivers.
Read more...Expanded range of high-thermal-performance QSiC modules
Power Electronics / Power Management
SemiQ’s half-bridge series for data centre power converters and industrial motor drives features low RDSON SiC MOSFETs and parallel SBD diodes for best-in-class power density and conversion efficiency.
Read more...Transporting lithium batteries and IoT devices
Power Electronics / Power Management
With billions of rechargeable and non-rechargeable lithium cells and batteries powering most of the world’s consumer and industrial electronic devices, shipping them to customers through vast global logistics chains is often an overlooked topic.
Read more...Setting a new benchmark for high-power DC load testing Conical Technologies
Test & Measurement Power Electronics / Power Management
The new ITECH IT8900G/L high-speed, high-power DC electronic load offers a powerful combination of speed, scalability, precision and high-power density.
Read more...Quality batteries are critical for IIoT Uniross Batteries
Power Electronics / Power Management
Batteries intended for use in industrial operations must indeed offer complete reliability under extreme environmental conditions, resistance to vibration and harsh environments.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version