|
|
200 W half-chip regulator
18 August 2010, Power Electronics / Power Management
V·I Chip, a subsidiary of Vicor, has released its half-chip PRM regulator, the newest member of the company’s V·I Chip product line. The PRM48BH480T200A00 is a high power-density DC-DC solution for medium- to low-power applications with limited space. In its half-chip package (16,5 x 22,0 x 6,7 mm), this converter is 97% efficient at 200 W with the same power density as a 400 W full-size PRM.
The device operates from 48 V d.c. (38 to 55 V) to generate a regulated, adjustable 5 to 55 V output. The ZVS (zero-voltage-switching) buck-boost topology and high switching frequency (1 MHz) operation enable high efficiency and reduced size to reach power density over 80 W/cm³. The PRM can be used as a standalone, non-isolated voltage regulator or combined with V·I Chip’s full-chip or half-chip VTM current multipliers for a complete, isolated DC-DC solution direct to the point of load, with fast transient response and isolation to 2250 V d.c. The half-chip PRM is suitable for applications such as server processor and memory, ATE systems and LED drivers that require high efficiency, fast transient response, low profile and overall design flexibility.
An external control loop and current sensor maintain regulation and enable flexibility in the design of voltage and current compensation loops for precise power delivery. All V·I Chips are compatible with standard pick-and-place and surface-mount assembly processes. |
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- Rugged DC-DC converters
28 August 2019, Vepac Electronics, Power Electronics / Power Management
XP Power introduced two new series of wide input-range chassis- and DIN-rail mount DC-DC converters that offer simple and rapid installation into a wide variety of industrial and ITE applications. The ...
- Power controller for smart home appliances
28 August 2019, RF Design, Power Electronics / Power Management
Qorvo has introduced a new intelligent power control solution for reducing energy consumption, bulk, weight and noise in smart home appliances, AC-powered fans and compressors. This mixed-signal system-in-package ...
- UPS battery configuration made easy
28 August 2019, Forbatt SA, Power Electronics / Power Management
Determining the UPS (uninterruptible power supply) battery configuration using a formula can be quite complicated and, since many users are not very familiar with it, a more simplified method can be used ...
- Bidirectional laboratory power supply
28 August 2019, Vepac Electronics, Power Electronics / Power Management
EA Elektro-Automatik’s new 30 kW EA-PSB 10000 is a bidirectional power supply with a working efficiency of up to 96%, both as a source and as a drain with energy feedback. The device can be switched from ...
- 3 Watt DC-DC converters
28 August 2019, Avnet South Africa, Power Electronics / Power Management
Aimtec has introduced three new series of switching regulators – the AMSRB1-78JZ, AMSRL1-78JZ and AMSRL-78JZ – all meeting the EN62368 standard and suitable for IoT (Internet of Things) applications.
The ...
- Isolated PFC module
28 August 2019, Conical Technologies, Power Electronics / Power Management
SynQor has added a new isolated PFC (power factor correction) module to its AeroQor range of products for the airborne electronics market. Featuring highly efficient active power factor correction, the ...
- DC-DC converter for DIN-rail mounting
28 August 2019, Vepac Electronics, Power Electronics / Power Management
MTM Power is offering the HSD series of primary switched DIN-rail modules with DC input voltage. The devices offer an input voltage range of 20 - 72 V d.c. and allow efficient solutions for different ...
- DC UPS for DIN-rail mounting
31 July 2019, Vepac Electronics, Power Electronics / Power Management
The Effecta DCH series power supplies with UPS function are suitable for a variety of applications, and their robust IP 20 housing is applicable for all DIN-rail applications. With its power boost mode, ...
- 80 V buck driver for LEDs
26 June 2019, Altron Arrow, Power Electronics / Power Management
Infineon Technologies’ new LED driver, the ILD8150/E, features an innovative hybrid dimming mode technology for achieving 0,5 percent of the target current. With its supply voltage range from 8 V up to ...
- AC-DC power supplies for medical devices
26 June 2019, Vepac Electronics, Power Electronics / Power Management
XP Power has announced two new ranges of AC-DC power supplies that provide BF class insulation for healthcare applications where ehnanced EMC performance is a key requirement.
The PBR500 and PBR650 ...
- N-channel enhancement mode FET
26 June 2019, Electrocomp, Power Electronics / Power Management
Diotec Semiconductor’s 2N7002 is a widely used small-signal MOSFET in SOT-23 package. With an RDS(on) of maximum 2 Ω, the component offers a lower on-state resistance than the common industry standard. ...
- Digitally controlled power supply
26 June 2019, Vepac Electronics, Power Electronics / Power Management
XP Power’s nanofleX series of configurable, modular, digitally controlled AC-DC power supplies is constructed in a compact, low-profile 1U mechanical chassis format that suits today’s space constrained ...
|
|
