Analogue, Mixed Signal, LSI


Stereo headphone amplifiers

29 September 2010 Analogue, Mixed Signal, LSI

austriamicrosystems has announced the AS3560 and AS3561 stereo headphone amplifiers which continuously adjust the supply rails in response to the input signal, in an effort to reduce power consumption as compared to traditional Class AB amplifiers. The AS3560 is a Class G amplifier while the AS3561 extends the power savings even more with a Class H topology. Both 30 mW devices use differential line inputs to minimise the effects of ground noise and EMI susceptibility, and also feature low quiescent current of 1 mA with both channels enabled. Shutdown current is less than 5 μA. Audio figures include >100 dB SNR @ 1 Vrms and THD of 0,02% at 16 Ω. The integrated charge pump generates a symmetric negative supply for true ground output signal levels. An I²C bus allows volume control with 32 gain steps as well as independent channel control.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

PolarFire SoC Discovery Kit
ASIC Design Services DSP, Micros & Memory
By offering a user-friendly, feature-rich development kit for embedded processing and compute acceleration, Microchip is making emerging technology more accessible to engineers at all levels.

Read more...
High-speed PIN diode
Altron Arrow Analogue, Mixed Signal, LSI
Vishay’s new high-speed Silicon PIN diode is able to detect both visible and near infra-red radiation over a wide spectrum range from 350 to 1100 nm.

Read more...
Power efficient mid-range FPGA
ASIC Design Services News
The new imperatives of the intelligent edge – power efficiency, security and reliability – are forcing system architects and design engineers to find new solutions. For the growing number of system designers ...

Read more...
Isolation transformers for high-speed SPE applications
ASIC Design Services Interconnection
Utilising the UWBX patent pending technology, HALO has been able to achieve the high-speed performance needed to meet insertion loss and return loss required for a fully-compliant 2.5GBASE-T1 Ethernet port over single-pair copper cables.

Read more...
MPLAB PICkit 5
ASIC Design Services DSP, Micros & Memory
Microchip Technology’s MPLAB PICkit 5 in-circuit debugger/programmer enables quick prototyping and portable, production-ready programming for all Microchip components, including PIC, dsPIC, AVR, and SAM devices.

Read more...
FPGAs speed up intelligent edge designs
ASIC Design Services Editor's Choice DSP, Micros & Memory
Microchip Technology has added nine new technology- and application-specific solution stacks to its growing collection of mid-range FPGA and SoC support.

Read more...
Analogue front end for sensor measurements
Electrocomp Analogue, Mixed Signal, LSI
The NJU9103 AFE from Nisshinbo is a tiny analogue front end, with a 16-bit resolution ADC and up to 512 x signal amplification from the programmable gain amplifier.

Read more...
Single-channel software configurable I/O
Altron Arrow Analogue, Mixed Signal, LSI
These use cases of the AD74115H include analogue output and input, digital output and input, resistance temperature detector (RTD), and thermocouple measurement capability.

Read more...
Current-sense amplifier with PWM rejection
Altron Arrow Analogue, Mixed Signal, LSI
Analog Devices’ AD8410A is a high voltage, high bandwidth current-sense amplifier that features an initial gain of 20 V/V and a 2,2 MHz bandwidth.

Read more...
Updated portable library API
ASIC Design Services DSP, Micros & Memory
The Holt Portable Library API now supports all Holt’s MIL-STD-1553 terminal devices, providing the customer with a layer of abstraction using standardised functions.

Read more...