Test & Measurement


PXIe DAQ module

13 October 2010 Test & Measurement

New from National Instruments is the PXIe-4331, the latest in the SC Express family of high-performance data acquisition (DAQ) modules with built-in signal conditioning.

The device is a simultaneous high-speed bridge input module that provides signal conditioning for dynamic measurements from strain, pressure, torque and load sensors. The PXIe-4331 increases the speed of bridge-based measurements and, with PXI Express (PXIe), provides 250 MBps of dedicated bandwidth per device to give engineers the freedom to increase channel count without compromising sampling rates or data throughput.

The module features eight channels with 24-bit analog-to-digital converters (ADCs) per channel and 102,4 kSps per channel sampling rate. To improve accuracy and reject noise, the module offers antialiasing and digital filters per channel. Additionally, it includes an independent programmable 0,625 to 10 V excitation voltage on each channel for flexibility and fault protection. The PXIe-4331 also provides remote sensing, internal bridge completion and shunt calibration options per channel. The 8-channel bridge input module can scale to a 136-channel system in a single chassis and thousands of channels when synchronising across multiple chassis. The simultaneous sampling, high sample rate and channel synchronisation features make the module well suited for structural test applications such as fatigue and impact test, design validation and other dynamic tests, which are common in industries such as automotive, aerospace, defence and renewable energy.

The PXIe-4331 includes NI-DAQmx driver software with support for multidevice tasks, making it possible for engineers to easily synchronise multiple modules. Engineers can combine the DAQ module with a variety of NI hardware including other SC Express modules, X Series DAQ devices, dynamic signal acquisition products and more than 1500 types of I/O available on the PXI platform. The PXIe-4331 also integrates with NI software including LabVIEW, the LabVIEW real-time module and DIAdem.

For more information contact National Instruments, 0800 203 199, [email protected], www.ni.com/southafrica





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Single channel, programmable PSU
Electrocomp Express Test & Measurement
Rohde & Schwarz’ NGC101 is a NGC100-series power supply with a wide range of functions that make them ideal for use in development labs and industrial environments.

Read more...
Next-gen LineScan camera
Eagle Africa Technology Test & Measurement
New Imaging Technologies has launched the new LiSaSWIR, its next-generation SWIR LineScan camera and sensor.

Read more...
Ultra-portable spectrum analyser
Vepac Electronics Test & Measurement
The PXN-400Z from Harogic is a handheld spectrum analyser covering a frequency range of 9 kHz to 40 GHz with a 100 MHz analysis bandwidth.

Read more...
Why your next oscilloscope should be PC-based
Comtest Test & Measurement
For decades, traditional benchtop oscilloscopes have been a cornerstone of engineering, offering reliability, precision, and familiarity. However, as technology evolves, so do the tools we rely on.

Read more...
Versatile 3-in-1 instrument
Vepac Electronics Test & Measurement
The ARB Rider AWG-2000 is the cost-effective and powerful two or four channel arbitrary function generator and two or four channel arbitrary waveform generator with advanced sequencer functionality.

Read more...
Analyser and voltmeter capability added to portable instruments
Tamashi Technology Investments Test & Measurement
Anritsu Company had added Vector Network Analyzer and Vector Voltmeter measurements to their industry standard Site Master instruments.

Read more...
Marktech’s latest LEDs and photodiodes
NuVision Electronics Test & Measurement
Designed for precision sensing and emission tasks, Marktech’s optoelectronic lineup serves medical, industrial, aerospace, and environmental markets.

Read more...
MEMS air quality sensor
Future Electronics Test & Measurement
Bosch Sensortec’s BME690 is the latest-generation gas sensor that combines advanced monitoring capabilities with innovative artificial intelligence functionality.

Read more...
Telemetry retrofit for sustainable resource management
CST Electronics Test & Measurement
AquaMeter is a cost-effective secure telemetry retrofit that can easily be added to hundreds of millions of legacy mechanical water meters.

Read more...
True-RMS clamp meter measures 2500 A
Comtest Test & Measurement
The Fluke 376 FC True-RMS Clamp Meter with iFlex is the most advanced troubleshooting tool for industrial and commercial electricians.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved