Opto-Electronics


Non-diffused white LED

27 October 2010 Opto-Electronics

Vishay has announced a new white, non-diffused 3 mm LED optimised for high-end applications with extreme luminous intensity requirements. Utilising ultrabright InGaN technology, the VLHW4100 features a high luminous intensity from 4500 mcd to 11250 mcd at 20 mA.

The LED features a clear, untinted plastic case with a lens and viewing angle of ±22,5°, and high light output and visibility performance. With its luminous intensity, the VLHW4100 provides an alternative to incandescent lamps and is intended for a wide range of general and consumer applications, including interior and exterior lighting, outdoor LED panels, light guides, and instrumentation and front panel indicators.

The VLHW4100 offers low thermal resistance down to 400 K/W and power dissipation up to 95 mW. Featuring a ±22,5° angle of half intensity, it is luminous categorised, per packaging unit, for luminous intensity and colour. ESD withstand voltage for the LED is up to 2 kV, in accordance with JESD22-A114-B. The device is compliant to RoHS directive 2002/95/EC.

For more information contact EBV Electrolink, +27 (0)21 402 1940, [email protected], www.ebv.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Compact direct Time-of-Flight 3D LiDAR module
Altron Arrow Opto-Electronics Electronics Technology AI & ML
The VL53L9 from STMicroelectronics is the first direct Time-of-Flight (dToF) 3D LiDAR all-in-one module in ST’s portfolio, offering a resolution of 2,3K zones, wide field of view, on-chip processing, 100 frames per second, and sensing range from 5 centimeters to 9 meters.

Read more...
Edge AI improves condition monitoring
EBV Electrolink AI & ML
STMicroelectronics has introduced the IIS3DWB10IS, an intelligent MEMS vibration sensor designed for high-performance industrial condition monitoring applications.

Read more...
Easy to integrate, quick to react
Opto-Electronics
Würth Elektronik has expanded its range of WL-ICLEDs – RGB-LEDs with integrated controller – to include dual-wire ICLEDs.

Read more...
Industrial time-of-flight proximity sensor
EBV Electrolink Opto-Electronics
STMicroelectronics’ VL53L4ED is a compact, high accuracy time-of-flight proximity sensor designed for industrial and embedded applications that require precise short range distance measurement.

Read more...
Flexible enclosure lighting solutions
IOT Electronics Opto-Electronics
Phoenix Contact’s range of enclosure lights is designed to provide uniform illumination throughout control cabinets, while offering flexible installation and energy-efficient operation.

Read more...
Industry’s smallest laser firing system IC
Opto-Electronics
Silanna Semiconductor recently announced that its FirePower laser firing system ICs for smaller, more efficient LiDAR and rangefinder applications are available in production quantities.

Read more...
More light, greater efficiency, better growth
Würth Elektronik eiSos Opto-Electronics
Würth Elektronik has expanded its WL-SMDC Horticulture product line with new LEDs with wavelengths of 450, 660, and 730 nm in the 3535 package.

Read more...
Intelligent control boosts tunnel safety
IOT Electronics Opto-Electronics
Intelligent tunnel lighting systems are helping operators by delivering adaptive illumination that enhances both safety and energy efficiency.

Read more...
Case Study: Turning data into insight
Hamamatsu Photonics UK Editor's Choice Opto-Electronics
Hamamatsu Photonics’ InGaAs PIN photodiode detector has proven consistent, reliable, and robust for more than a decade, helping Axetris to deliver stable, repeatable measurements.

Read more...
Ultra-low-power smart metering
EBV Electrolink Analogue, Mixed Signal, LSI
ScioSense’s UFC23 sensor combines improved resolution and offset stability with ultra-low standby current, enabling high-end battery-powered water, heat, gas and leak detection meter designs.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved