Opto-Electronics


High-speed optoisolator

27 October 2010 Opto-Electronics

OPTEK Technology has released an optical isolator that delivers AC and DC voltage isolation up to 16 kV while achieving digital data transmission rates of 2 Mbd.

The UL-recognised, high-voltage OPI1268 is designed for power isolation in PC board circuits in industrial electronics systems, medical electronic equipment and office machines.

The output IC detects the incoming optical signal and converts it to a proportionate current, which is fed through a high-gain linear amplifier and compensated for temperature, current and voltage, resulting in a highly stable digital output with an open collector inverter configuration. The optoisolator combines a high efficiency GaAlAs (Gallium Aluminum Arsenide) LED with a peak wavelength of 850 nm, optically coupled to a Photologic photodiode in the output IC.

Forward current is 10 mA typical/50 mA max, with typical propagation delays of less than 500 ns. Creepage distance/air path is 24,64 mm and the device is packaged in an opaque, high-dielectric plastic housing measuring 27,94 x 6,35 x 8,89 mm with a five-lead configuration. Operating temperature range is from


-40°C to +100°C.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

M12 panel mount connectors
Communica Interconnection
Binder, a specialist in industrial circular connectors, offers a particularly wide range of M12 panel mount connectors that cover a wide variety of connection types, materials, and fastening solutions.

Read more...
Enhanced breaker status and communication module
Schneider Electric South Africa Opto-Electronics
Schneider Electric has announced the launch of its new Breaker Status and Communication Module (BSCM) Modbus SL/ULP, which delivers enhanced performance, improved connectivity, and simplified integration for power distribution systems.

Read more...
Heat-resistant LEDs
Opto-Electronics
Würth Elektronik’s new RGB LEDs are characterised by excellent heat resistance with an insensitivity to temperatures from -40 to 100°C making them ideal solutions for reliable, colour-variable lighting in applications at high operating temperatures.

Read more...
PhotoMOS relays
Future Electronics Opto-Electronics
The AQY221R2SX and AQY221R2S PhotoMOS from Panasonic Industry ensures excellent characteristics and high-speed switching performance.

Read more...
Mouser now shipping onsemi’s image sensors
TRX Electronics Opto-Electronics
The AR0145CS is a 1/4,3-inch CMOS digital image sensor with a 1280 (H) x 800 (V) active-pixel array that can capture both continuous video and single frames.

Read more...
Adaptive optics’ power solution
Altron Arrow Opto-Electronics
Vicor power-dense adaptive optical modules enable colossal telescopes to look into the past for deep space discoveries.

Read more...
Ultra-high speed photo detection
Opto-Electronics
TDK Corporation has announced a photo-spintronic conversion element combining optical, electronic, and magnetic elements that can respond at an ultra-high speed of 20 picoseconds.

Read more...
High-speed lasers
RFiber Solutions Opto-Electronics
Macom are a high-volume manufacturer of lasers, deploying more than 100 million devices with a reliability of less than 50 FIT and greater than 100 years of wear-out lifetime

Read more...
High-performance optical interconnect
Opto-Electronics
STMicroelectronics has unveiled its next generation of proprietary technologies for higher-performing optical interconnect in datacentres and AI clusters.

Read more...
Halo mid-board optical transceiver
Spectrum Concepts Opto-Electronics
The Samtec Halo mid-board transceiver has been designed for next-generation embedded applications that require 56 and 112 Gbps PAM4 performance in low profile and ruggedised form factors.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved