RECOM has developed a new series of constant current LED drivers with universal AC inputs, power factor correction and UL certification.
The first two products in the RACD series are a 12 W and a 20 W solution to meet the needs of the high-brightness LED lighting market. With universal AC input and constant current output of 350 mA or 700 mA, the driver modules are suitable for driving almost any LED manufacturer’s products and almost all LED systems in the industry as they have a very wide output voltage range over which the constant current regulation works. They can be used with single LEDs or with strings of up to 16 LEDs.
Both the RACD12 and RACD20 also feature built-in >0,95 power factor correction, 3 kV a.c. input/output isolation, a fused input and are fully protected against short circuit, open circuit, overload and over-temperature, all of which guarantee a robust design. The converters are certified to the new UL8750 standard for driving LED arrays. The drivers are designed to be simple to use without an extensive knowledge of electronics and offer both input and output screw terminals and an additional 5,5 mm socket output. The socket allows the LEDs to be pre-wired with a matching plug to avoid possible miswiring.
Compact direct Time-of-Flight 3D LiDAR module Altron Arrow
Opto-Electronics Electronics Technology AI & ML
The VL53L9 from STMicroelectronics is the first direct Time-of-Flight (dToF) 3D LiDAR all-in-one module in ST’s portfolio, offering a resolution of 2,3K zones, wide field of view, on-chip processing, 100 frames per second, and sensing range from 5 centimeters to 9 meters.
Read more...40 W and 75 W railway DC/DC converter Brabek
Power Electronics / Power Management
RECOM has announced two new cost-efficient DC/DC converters for the rail market with an ultra-wide 11:1 input range to cover all nominal input voltages from 24 to 110 V DC.
Read more...Easy to integrate, quick to react
Opto-Electronics
Würth Elektronik has expanded its range of WL-ICLEDs – RGB-LEDs with integrated controller – to include dual-wire ICLEDs.
Read more...Industrial time-of-flight proximity sensor EBV Electrolink
Opto-Electronics
STMicroelectronics’ VL53L4ED is a compact, high accuracy time-of-flight proximity sensor designed for industrial and embedded applications that require precise short range distance measurement.
Read more...4 kW e-mobility DC-DC converter Brabek
Power Electronics / Power Management
The RECOM RMOD4000 series of compact, plug-and-play DC-DC converters is a cost-effective solution to provide isolated 14 V, 28 V, or 56 V DC network rails from a high input voltage between 180 and 950 V DC.
Read more...Flexible enclosure lighting solutions IOT Electronics
Opto-Electronics
Phoenix Contact’s range of enclosure lights is designed to provide uniform illumination throughout control cabinets, while offering flexible installation and energy-efficient operation.
Read more...Industry’s smallest laser firing system IC
Opto-Electronics
Silanna Semiconductor recently announced that its FirePower laser firing system ICs for smaller, more efficient LiDAR and rangefinder applications are available in production quantities.
Read more...More light, greater efficiency, better growth Würth Elektronik eiSos
Opto-Electronics
Würth Elektronik has expanded its WL-SMDC Horticulture product line with new LEDs with wavelengths of 450, 660, and 730 nm in the 3535 package.
Read more...Intelligent control boosts tunnel safety IOT Electronics
Opto-Electronics
Intelligent tunnel lighting systems are helping operators by delivering adaptive illumination that enhances both safety and energy efficiency.
Read more...Case Study: Turning data into insight Hamamatsu Photonics UK
Editor's Choice Opto-Electronics
Hamamatsu Photonics’ InGaAs PIN photodiode detector has proven consistent, reliable, and robust for more than a decade, helping Axetris to deliver stable, repeatable measurements.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version