Test & Measurement


EXFO adds ODU0 and ODUflex capabilities

2 February 2011 Test & Measurement

EXFO announced the addition of full ODU0 and ODUflex capabilities to its next-generation 10G and 40G Transport Blazer test module series for packet optical transport.

ODU0 provides the new mapping for the transport of 1 Gbps Ethernet signals with multiplexing capability up to 100 GB. ODU0 allows for OTN networks to be backward-compatible with industry installed base and is optimised for Gigabit Ethernet clients and transport of client signals with a rate below 1,238 Gbps.

In addition, the ODUflex capability brings benefits to operators, including higher efficiency for network configuration and bandwidth allocation, providing a future-proof solution for the transport of any client signal at any rate. It enables technology shared by network equipment manufacturers, service provider labs and field-testing crews, and is instrumental in deploying next-generation packet optical transport networks.

The new ODU0 and ODUflex capabilities are available as a software option for all Transport Blazer OTN test modules, including the FTB-8120NG/NGE, FTB-8130NG/NGE and FTB-8140. In addition to the FTB portable form factor that is targeted at field testing, these functionalities are available in the IQS rack-mount form factor (IQS-8120NG/NGE, IQS-8130NG/NGE and IQS-8140) for lab verification.

For more information contact Chris Nel, Lambda Test Equipment, +27 (0)12 349 1341, [email protected], www.lambdatest.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Real-time monitoring for smart power distribution
CST Electronics Test & Measurement
By leveraging high-precision measurement, high-speed wave-recording, and AI-enabled analytics, the InHand Wireless Overhead-lines System empowers power utilities to accurately identify line faults and perform comprehensive load analysis.

Read more...
Compact vector network analyser
Vepac Electronics Test & Measurement
Siglent Technologies has introduced the SNA5000X-E Vector Network Analyzer, a compact, cost-effective solution engineered to meet essential RF testing needs, while maintaining dependable performance.

Read more...
Smart digital fibre sensor
Avnet Abacus Test & Measurement
Panasonic Industry Europe has introduced the new FX-250 digital fibre sensor designed to support users in their daily working routines as effectively as possible.

Read more...
Compact USB spectrum analyser solution
Vepac Electronics Test & Measurement
The HAROGIC SAN Series USB Spectrum Analyser is a compact USB-based spectrum analyser and receiver that covers a broad frequency range from 9 kHz up to 9 GHz.

Read more...
B&K Precision’s Series 1820B frequency counter
Comtest Test & Measurement
These compact and versatile instruments are designed for a wide range of frequency measurement applications, from telecommunications to verification and validation of oscillators.

Read more...
How transition-edge sensors detect microwave radiation
Test & Measurement
The elegant interplay of superconductivity, thermal physics, and precision electronics makes TES technology a cornerstone of modern low-energy photon detection.

Read more...
Compact high precision magnetometer
Future Electronics Test & Measurement
Bosch Sensortec has introduced the BMM350, a compact 16-bit, 3-axis magnetometer engineered to deliver high accuracy, low noise, and exceptional energy efficiency in space constrained designs.

Read more...
Ultra compact NTC thermistors
RS South Africa Test & Measurement
Murata Manufacturing Co. has expanded its compact NCU03 series of NTC thermistors with two ultra-small 0603M devices tailored for consumer and automotive designs.

Read more...
Omniflex uses LoRaWAN to track water usage
Omniflex Remote Monitoring Specialists Test & Measurement
Omniflex has helped New South Wales Ports improve its ability to track water usage by installing remote monitoring to 38 water meters at its Port Kembla site, sending the data to the NSWPorts web portal.

Read more...
Surviving the extremes: Understanding shock and vibration in MEMS sensors
Altron Arrow Editor's Choice Test & Measurement
By considering factors such as mechanical headroom, damping, and system-level robustness, designers can ensure that the chosen sensor not only survives, but performs reliably over time.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved