Electronics Technology


Ultra stable TCXO

16 February 2011 Electronics Technology

Precision Devices has released an ultra stable temperature compensated crystal oscillator (TCXO) in a 5 by 3,2 by 1,5 mm package.

The TS05 provides stability of ±0,2ppm over an operating temperature range of -40°C to +85°C. When operating over a restricted temperature range of -10°C to 70°C, stability is even tighter at ±0,1 ppm. Stability is ±0,05 ppm for supply voltage variations up to 5%, and for load variations up to 10%. With ageing, the maximum change is only ±0,5 ppm per year, to ensure reliable long-term performance.

At a frequency of 26 MHz, typical phase noise figures are -117 dBc/Hz at an offset of 100 Hz, -138 dBc/Hz at an offset of 1 kHz and -152 dBc/Hz at an offset of 10 kHz. Aimed at femtocell and base station applications, the TS05 covers the frequency range from 10 MHz to 52 MHz.

The oscillator operates from a 3 V supply voltage, and draws 2 mA current when generating a clipped sine wave output, and 4 mA when generating a CMOS square wave output.

For more information contact Jeva Narian, Arrow Altech Distribution, +27 (0)11 923 9600, [email protected], www.arrow.altech.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Cost-effective microcontroller series
Altron Arrow DSP, Micros & Memory
The STM32C5 series from STMicroelectronics delivers an excellent balance of performance, efficiency, and affordability for embedded designs that require more capability without increasing bill of materials cost.

Read more...
Understanding two key tools for cleaner serial data
Altron Arrow Editor's Choice Analogue, Mixed Signal, LSI
Understanding how pre-emphasis and equalisation works, and when to use one over the other, is critical when designing reliable high-speed systems.

Read more...
Connected without limits: An engineering perspective on Altron Arrow’s wireless ecosystem
Altron Arrow Editor's Choice Design Automation
Wireless connectivity is no longer a supporting technology, but rather, a core design consideration that underpins modern electronic systems across industries.

Read more...
Analogue reservoir AI chip capable of real-time learning
Altron Arrow AI & ML
TDK Corporation has jointly developed a prototype of a reservoir AI chip using an analogue electronic circuit that mimics the cerebellum with Hokkaido University.

Read more...
Ultra-low jitter clocks
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Skyworks has introduced a new family of ultra-low jitter programmable clocks designed to meet the increasing demands of next-gen connectivity.

Read more...
Efficient Bluetooth SoC
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The EFR32BG29 wireless SoC from Silicon Labs is a highly efficient, high memory, low-power, and ultra compact SoC designed for secure and high-performance wireless networking for IoT devices.

Read more...
RTOS – The future of embedded systems
Altron Arrow Edge Computing & IIoT
At the heart of the next generation of embedded devices is efficient yet powerful system-level code, often based on an open-source real-time operating system.

Read more...
Reference design for NB-IoT plus GNSS
Altron Arrow Design Automation
ST Microelectronics’ STDES-ST87M01IGN is a reference design for the ST87M01 NB-IoT + GNSS module, implemented on a 2-layer FR4 PCB (90 x 60 x 1,6 mm).

Read more...
Gen5 Pro enhances power conversion
Altron Arrow Power Electronics / Power Management
The Infineon Technologies CoolSET ICE501XD and ICE502XD PWM Fixed Frequency Gen5 Pro controllers are advanced solutions for auxiliary power supplies in demanding high-voltage applications.

Read more...
Compact 6 A automotive buck converter
Altron Arrow Power Electronics / Power Management
Delivering up to 6 A of continuous output current, the DCP0606Y from STMicroelectronics enables efficient regulation of low-voltage rails commonly used in modern vehicle electronics and industrial systems.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved