Opto-Electronics


Cyan LEDs

16 February 2011 Opto-Electronics

Avago Technologies has débuted cyan-coloured high-power LEDs optimised for traffic signals, sign backlighting and architectural, commercial and decorative lighting applications.

The new ASMT-JC11 and ASMT-AC00 1 W LEDs have small footprints, measuring 5 by 4 by 1,85 mm for the ASMT-JC11 device’s 6-leaded small outline package (SOP). Both devices can withstand maximum current of up to 500 mA to provide high flux output performance of 58 lumens at 350 mA. They feature an exposed thermal pad for efficient heat dissipation and low thermal resistance of 10°C/W. High maximum allowable junction temperatures of 150°C for the ASMT-JC11 device and 135°C for ASMT-AC00 device enable the LEDs to be driven in stringent operating conditions.

The devices offer electrostatic discharge (ESD) resistance of 16 kV and have an electrically neutral heatsink pad that allows them to be configured in an array using a common metal substrate without fear of electrical shorting.

For more information contact EBV Electrolink, +27 (0)21 402 1940, [email protected], www.ebv.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Compact direct Time-of-Flight 3D LiDAR module
Altron Arrow Opto-Electronics Electronics Technology AI & ML
The VL53L9 from STMicroelectronics is the first direct Time-of-Flight (dToF) 3D LiDAR all-in-one module in ST’s portfolio, offering a resolution of 2,3K zones, wide field of view, on-chip processing, 100 frames per second, and sensing range from 5 centimeters to 9 meters.

Read more...
Edge AI improves condition monitoring
EBV Electrolink AI & ML
STMicroelectronics has introduced the IIS3DWB10IS, an intelligent MEMS vibration sensor designed for high-performance industrial condition monitoring applications.

Read more...
Easy to integrate, quick to react
Opto-Electronics
Würth Elektronik has expanded its range of WL-ICLEDs – RGB-LEDs with integrated controller – to include dual-wire ICLEDs.

Read more...
Industrial time-of-flight proximity sensor
EBV Electrolink Opto-Electronics
STMicroelectronics’ VL53L4ED is a compact, high accuracy time-of-flight proximity sensor designed for industrial and embedded applications that require precise short range distance measurement.

Read more...
Flexible enclosure lighting solutions
IOT Electronics Opto-Electronics
Phoenix Contact’s range of enclosure lights is designed to provide uniform illumination throughout control cabinets, while offering flexible installation and energy-efficient operation.

Read more...
Industry’s smallest laser firing system IC
Opto-Electronics
Silanna Semiconductor recently announced that its FirePower laser firing system ICs for smaller, more efficient LiDAR and rangefinder applications are available in production quantities.

Read more...
More light, greater efficiency, better growth
Würth Elektronik eiSos Opto-Electronics
Würth Elektronik has expanded its WL-SMDC Horticulture product line with new LEDs with wavelengths of 450, 660, and 730 nm in the 3535 package.

Read more...
Intelligent control boosts tunnel safety
IOT Electronics Opto-Electronics
Intelligent tunnel lighting systems are helping operators by delivering adaptive illumination that enhances both safety and energy efficiency.

Read more...
Case Study: Turning data into insight
Hamamatsu Photonics UK Editor's Choice Opto-Electronics
Hamamatsu Photonics’ InGaAs PIN photodiode detector has proven consistent, reliable, and robust for more than a decade, helping Axetris to deliver stable, repeatable measurements.

Read more...
Ultra-low-power smart metering
EBV Electrolink Analogue, Mixed Signal, LSI
ScioSense’s UFC23 sensor combines improved resolution and offset stability with ultra-low standby current, enabling high-end battery-powered water, heat, gas and leak detection meter designs.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved