XP Power announced the launch of the ECP150 series of open-frame 150 W AC-DC power supplies. Measuring just 101,6 x 50,8 x 32 mm, the series complies with UL/EN/IEC60950-1 and UL/EN/IEC60601-1 safety standards for medical and IT equipment.
In addition, the units have a no-load input power of less than 0,5 W and typical efficiency of 91%, helping the end equipment comply with internationally recognised energy efficiency initiatives.
Operating from a universal input of 90 to 264 V a.c., there are five single-output models available within the range, covering the nominal outputs of +12, +15, +24, +28 and +48 V d.c. A 12 V/0,5 A output is also provided to power an external fan if required. Up to 100 W output is achieved by convection cooling alone, and with only 15 cfm of forced cooling the full 150 W output is available.
The ECP150 has a wide range of operating temperature, from -20°C to + 70°C, with full power output available up to +50°C with derating above; no additional heat sinking is required. The units comply with the EN55022 level B standard for conducted noise without the need for additional filtering components. Over-voltage, overload and short circuit protection features are included as standard across the range.
Finding value for money with your IoT battery Uniross Batteries
Power Electronics / Power Management
Designing an IoT application involves a lot of choices. Designers are looking for performance and quality, but need to balance those alongside a low Total Cost of Ownership.
Read more...Powering the IoT Uniross Batteries
Power Electronics / Power Management
Choosing the right battery is not simply a technical detail, but a defining factor in the longevity and cost-effectiveness of any IoT deployment.
Read more...The move to DC infrastructure IOT Electronics
Power Electronics / Power Management
The shift toward direct current infrastructure in data centres is accelerating as operators pursue higher efficiency, improved reliability, and stronger alignment with renewable energy goals.
Read more...Power inductor for automotive applications Würth Elektronik eiSos
Power Electronics / Power Management
The WE-MXGA inductor features RDC values up to 25% lower and a saturation current up to 47% higher compared to other components currently available on the market.
Read more...High-performance DC-DC converter Conical Technologies
Power Electronics / Power Management
With a wide 9 - 40 V DC input range, the Claf Power DWHB400-F24xxN series is a high-performance DC-DC converter family ideally suited for 12 V and 24 V battery-based systems including vehicles, off-grid installations, and distributed power architectures.
Read more...Versatile outdoor waterproof connectors Vepac Electronics
Interconnection
The LP-20 outdoor waterproof connector series offers a versatile range of rugged, circular connectors with 2, 3, 4, 5, 7, 8, 9, 12 and 14-pin configurations.
Read more...DC-DC converters for next-generation IoT iCorp Technologies
Power Electronics / Power Management
AIPUPOWER’s K78XXJT-500R3 and K78XXJT-500R3-LB give designers a compact, high-efficiency power option for battery-powered and space-constrained systems, combining up to 96% efficiency with no-load input current as low as 0,2 mA.
Read more...240 W in compact form factor Brabek
Power Electronics / Power Management
The cost-effective and reliable RECOM RACPRO1-S240E DIN-rail mount AC-DC series is only 125 x 139 mm and 39 mm wide, yet provides 240 W output.
Read more...Rugged AI PC for industry Vepac Electronics
AI & ML
Designed to operate where conventional systems fall short, the TB-7145-MVS compact industrial PC supports advanced machine inferencing, real-time data handling, and high-performance graphics workloads without compromise.
Read more...You cannot manage what you cannot measure
Power Electronics / Power Management
South African sites are generating solar energy. Most still have no idea what is consuming it… or when, or why. Intelligent load management hardware is changing that.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version