Power Electronics / Power Management


25 W LED power supply

27 April 2011 Power Electronics / Power Management

Mean Well has introduced a new 25 W AC-DC LED power supply with active power factor correction and constant current output. The PLD-25 series is targeted at lower-wattage applications for the indoor/decorative lighting market.

With a simplified, single-stage PFC topology, a power factor above 0,9 can be achieved economically. Efficiency of the power supplies is as high as 86%, allowing them to operate between -30°C and +60°C using free air convection alone. With two-wire input design, these LED drivers are enclosed by a plastic case with 94V-0 fire resistance level which also protects users against dangerous electric shock.

Standard functions include short circuit, overload and over-temperature protections. The new models are equipped with 7,5 cm/#18 AWG and 15 cm/#18 AWG input/output wires to enable flexible installation in various systems. The units comply with global lighting certificates per UL8750 and EN61347, CE (EN55015 and EN61547) and FCC Part 18.





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

NVDC power-path control to 1– 6 cell battery systems
iCorp Technologies Power Electronics / Power Management
SG Micro’s SGM41581 is an I2C-controlled narrow voltage direct charging buck boost charge controller designed to simplify robust power delivery in systems that must seamlessly operate from an adapter input or a battery pack.

Read more...
Precise, adaptive battery health-monitoring
RS South Africa Power Electronics / Power Management
New fuel gauge solution from Nordic delivers State-of-Health reporting, adaptive battery modelling, and seamless fleet observability via nRF Cloud.

Read more...
Compact 6 A automotive buck converter
Altron Arrow Power Electronics / Power Management
Delivering up to 6 A of continuous output current, the DCP0606Y from STMicroelectronics enables efficient regulation of low-voltage rails commonly used in modern vehicle electronics and industrial systems.

Read more...
The new role of UPS technology in high-precision automation
Omron Electronics Power Electronics / Power Management
OMRON’s BU_2SW and BU_2RWL series UPS systems are engineered to offer a robust, online type power architecture designed to safeguard sensitive AC powered systems across a wide range of industries.

Read more...
Rugged railway-grade DC-DC power modules
iCorp Technologies Power Electronics / Power Management
iCorp Technologies has introduced the AIPUPOWER ZCD100 and ZCD150 Series, a family of rugged DC-DC converters designed to meet the demanding electrical and environmental requirements of railway and transportation systems.

Read more...
Four-quadrant regenerative grid simulator
Conical Technologies Power Electronics / Power Management
The IT7900EP series high-performance regenerative grid simulator from ITECH is a full four-quadrant AC grid simulator capable of both sourcing and sinking power.

Read more...
90 W PSU with 150% boost capability
Brabek Power Electronics / Power Management
RECOM’s cost effective REFIN2U-S90/CL DIN rail AC/DC boasts a 90 W rating with a boost capability of 150% for 4,5 seconds to allow for surge loads.

Read more...
Standalone USB PD controller
Future Electronics Power Electronics / Power Management
The STUSB4531 from STMicroelectronics is a standalone USB Power Delivery sink controller designed to streamline the implementation of USB-C power negotiation in sink devices without requiring a full software stack on a host microcontroller.

Read more...
Power module enhances AI data centre power density
Altron Arrow Power Electronics / Power Management
Microchip’s MCPF1525 power module with PMBus delivers 25 A DC-DC power and is stackable up to 200 A.

Read more...
MIL-Spec DC-DC power converters
Vepac Electronics Power Electronics / Power Management
PowerGood has introduced a range of 15 W to 600 W military DC-DC power converters engineered for mission critical defence applications.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved