ERNI Electronics has expanded its 1,0 mm MicroSpeed connector family to include a two-row 90° version in addition to the standard vertical male and female connectors designed for typical mezzanine applications.
The new right-angled connectors support data rates of up to 10 Gbps and are the result of intensive development work utilising new connecting and material technologies, combined with ERNI’s proven double-sided spring contacts and complete shielding of the top and bottom sides. The 90° MicroSpeed enables compact connections from either backplane to daughter cards or coplanar connections from one daughter card to another.
The modular and shielded signal connectors are available in two rows with 50 pins and operate across a wide temperature range (-55°C to +125°C). The signal contacts are built with SMT termination and are also equipped with two termination options for shielding depending on the application – SMT or through-hole reflow (THR) for extra heavy cards or extra mechanical strain relief. SMT signal coplanarity is 100% guaranteed at less than 0,10 mm on all contacts.
The signal connector‘s longitudinal pitch of 1,0 mm and transverse pitch of 1,5 mm allows the differential or single-ended signals to be arranged horizontally or vertically to meet specific impedance requirements. Optimised crosstalk behaviour is achieved through a variety of layout configurations and is supported by test data, available upon request.
MicroSpeed connectors are supplied in tape and reel packaging. They are equipped with black insulator housings to ensure fast and reliable visual recognition, and a pre-mounted pick-and-place cover for easy assembly onto the PCB.
Connectors for the Smart Factory Spectrum Concepts
Interconnection
[Sponsored] Designing networks for the smart factory can seem daunting, but the solutions are already available with Samtec providing a comprehensive range of interconnect technologies tailored to the demands of the modern factory.
Read more...Explosive zone connectors
Interconnection
The connector series design by Glenair is optimised for fast and easy crimp-contact wire termination, with ample wiring space in the cable housing and accessory hardware.
Read more...Reliable photovoltaic adapter set Phoenix Contact
Interconnection
Phoenix Contact’s PV-AS-MC4/6-150-MN-SET1 is a high-performance photovoltaic adapter set designed to bridge SUNCLIX connectors with MC4 connectors.
Read more...Multi-config connector series Future Electronics
Interconnection
Hirose Electric’s DF11 Series is a versatile 2,0 mm pitch, double-row board-to-wire connector designed to simplify a wide range of connection needs.
Read more...Ultra-rugged connector Hiconnex
Interconnection
Radiall has introduced a new connector for ribbon fibre connections called Fortero to provide proven performance in high-vibration, high-impact, and extreme environments.
Read more...Innovative D-Sub PushPull hood Hiconnex
Interconnection
HARTING has launched its new D-Sub PushPull housings, designed to improve efficient and process-safe handling by transforming a well-known connector family into a simplified solution.
Read more...High-density multicoax assemblies RFiber Solutions
Interconnection
Withwave’s high speed and high-density multicoax cable assemblies provides a wide range of multiple coax connectors and flexible cable assemblies.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version