RECOM has released a new range of isolated AC-DC power supply modules with low standby input currents, well suited for low-power applications or standby power supplies.
The RAC01 and RAC02 offer 1 W or 2 W of output power from a universal input voltage of 90-265 V a.c. and draw only 30 mW in standby. The RAC03 offers a higher output power of 3 W and draws 80 mW when unloaded. Typical applications include low-power supplies for clocks, remote control receivers, microcontroller circuits, wireless control systems or as relay drivers to switch higher power AC/DC supplies that otherwise could not meet green power/Energy Star regulations.
The modules offer well regulated, short-circuit protected DC outputs with 3,3 V, 5 V, 9 V, 12 V, 15 V or 24 V voltage options and a line and load regulation of typically ±2%. Conversion efficiency is up to 78%, which enables an operating temperature range of -25°C to +85°C for the 1 W part, reducing to +80°C for the 2 W and 3 W variants. The converters are designed for a lifetime of more than 1 million hours and come with RECOM’s standard 3 year warranty.
The devices are compact with a low-profile case that is 17 mm high or less, and contain a fully featured input filter and meet EN55022 Class B EMC without the need for any external components. They offer 3 kV a.c. isolation and are CE and UL safety certified.
Rugged railway-grade DC-DC power modules iCorp Technologies
Power Electronics / Power Management
iCorp Technologies has introduced the AIPUPOWER ZCD100 and ZCD150 Series, a family of rugged DC-DC converters designed to meet the demanding electrical and environmental requirements of railway and transportation systems.
Read more...Four-quadrant regenerative grid simulator Conical Technologies
Power Electronics / Power Management
The IT7900EP series high-performance regenerative grid simulator from ITECH is a full four-quadrant AC grid simulator capable of both sourcing and sinking power.
Read more...90 W PSU with 150% boost capability Brabek
Power Electronics / Power Management
RECOM’s cost effective REFIN2U-S90/CL DIN rail AC/DC boasts a 90 W rating with a boost capability of 150% for 4,5 seconds to allow for surge loads.
Read more...Standalone USB PD controller Future Electronics
Power Electronics / Power Management
The STUSB4531 from STMicroelectronics is a standalone USB Power Delivery sink controller designed to streamline the implementation of USB-C power negotiation in sink devices without requiring a full software stack on a host microcontroller.
Read more...MIL-Spec DC-DC power converters Vepac Electronics
Power Electronics / Power Management
PowerGood has introduced a range of 15 W to 600 W military DC-DC power converters engineered for mission critical defence applications.
Read more...Compact power MOSFET for high current switching Future Electronics
Power Electronics / Power Management
onsemi’s NTMFSC2D6N08X is a high-performance 80 V N-channel power MOSFET engineered for demanding switching and power conversion applications.
Read more...DC link capacitors for demanding applications RS South Africa
Power Electronics / Power Management
TDK Corporation has announced the B3271xP series of DC link film capacitors, offering high thermal robustness for demanding automotive and industrial power electronics.
Read more...N-channel power MOSFETs TRX Electronics
Power Electronics / Power Management
The TSM2N7002 series from Taiwan Semiconductor are logic-level N-channel power MOSFETs designed with low drain-source on-state resistance, reducing conduction losses and improving efficiency in switching applications.
Read more...Smart power protection, simplified TRX Electronics
Power Electronics / Power Management
onsemi electronic fuses (eFuses) deliver integrated, intelligent protection by combining overcurrent, overvoltage, over-temperature, reverse polarity, and inrush current safeguards in a single compact IC.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version