|
|
|
Event-detecting accelerometer
8 June 2011, Test & Measurement
SignalQuest’s SQ-XLD-01x is a factory calibrated, three-axis MEMS accelerometer with automatic peak capture and user-programmable alarm outputs. The alarm outputs are ideal for functions such as time stamping video recordings for future review.
The device is designed to operate as either a standalone sensor or it can be inserted between a GPS and a host without requiring an additional RS232 port. It uses advanced signal processing and statistical analysis methods to monitor and report acceleration information in an NMEA formatted sentence once per second.
Alarm thresholds are configured using a terminal emulator such as Microsoft Windows HyperTerminal. The user can configure independent thresholds for each channel and select between the ‘avg,’ ‘pk’ and ‘100mspk’ signals for each channel. A self levelling function removes tilt from threshold triggers to simplify installation. The sensor provides IP67 environmental protection and operates over a ±6 G range. For more information contact Andrew Hutton, RF Design, +27 (0)21 555 8400, sales@rfdesign.co.za, www.rfdesign.co.za |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- Double-balanced X-band mixer
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The MM1-0832LSM is a double-balanced mixer from Marki Microwave with an RF/LO frequency from 8 to 32 GHz and an IF frequency from DC to 12 GHz. This high-frequency X-band GaAs MMIC mixer works well as ...
- Low-noise RF amplifier
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The CMD299 from Custom MMIC is a wideband GaAs MMIC low-noise amplifier that operates from 18 to 40 GHz. It provides an output power of up to 7,5 dBm (0,0056 W), a gain of 16 dB, and has a noise figure ...
- Flexible wall-mount whip antenna
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The Cyclops WM.95 from Taoglas is a high-efficiency (over 50%) 915 MHz flexible whip antenna with a screw-mounted wall-mount L bracket. The radiation pattern is omnidirectional in the azimuth, allowing ...
- EXFO launches new category of fibre testing solutions
26 June 2019, Lambda Test, Test & Measurement
EXFO has launched what it describes as the first optical fibre multimeter (OFM).
Called Optical Xplorer, it aims to make fibre testing simple for all frontline technicians, whether beginner or expert, ...
- Handheld industrial Ethernet tester
26 June 2019, Coral-i Solutions , Test & Measurement
Ideal Networks has launched NaviTEK IE, a handheld network tester designed for commissioning, preventative maintenance and troubleshooting of PROFINET industrial Ethernet networks, plus standard Ethernet ...
- Positioning module for autonomous driving
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The ZED-F9K from u-blox is a high-precision multiband GNSS (global navigation satellite system) module with built-in inertial sensors. The module combines the latest generation of GNSS receiver technology, ...
- PCB cleaning diagnostic system
26 June 2019, Electronic Industry Supplies, Test & Measurement
The Verinas system from PBT Works is a dedicated piece of AOI (automatic optical inspection) equipment for evaluating remaining flux residues on PBT glass test boards.
The system can be used by electronics ...
- Positioning and cellular antenna
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The Tycho MA310 antenna is a combination, small form factor GPS/GLONASS and penta-band cellular (GSM/GPRS/CDMA/ PCS/DCS/ WCDMA/UMTS) antenna to simplify AVL or fleet management antenna systems worldwide.
Made ...
- RF power doubler
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The QPA3357 from Qorvo is a power doubler that operates from 47 to 1218 MHz. It provides an output power of 57 dBm, a gain of 28 dB, and has a noise figure of 4,5 dB. This power doubler is matched to ...
- Flexible wideband antenna
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The Taoglas FXUB64.18.0150C flexible wideband antenna has been designed to cover all working frequencies in the 600-3000 MHz spectrum, covering all cellular, 2,4 GHz Wi-Fi, ISM, NB-IoT, CAT-M1 and A-GPS ...
- High-frequency power dividers
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
Pasternack has launched a new series of high-frequency power dividers targeted at 5G cellular communication, automotive radar and satellite communication applications.
The lineup consists of 17 new ...
- Cellular module for LPWA applications
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
u-blox has announced the SARA R5 series of LTE M and NB-IoT modules for low power wide area (LPWA) IoT applications. The module, built on the UBX R5 cellular chipset and the M8 GNSS receiver chip, is ...
|
|
