Test & Measurement


PIR temperature sensor

6 July 2011 Test & Measurement

Texas Instruments is enabling contactless temperature measurement in portable consumer electronics with a single-chip passive infrared (IR) MEMS temperature sensor. The TMP006 provides electronics manufacturers with the ability to accurately measure device case temperature using IR technology. This promises to offer features and benefits over the common approach of approximating case temperature based on system temperature. The IC can also be used to measure temperature outside the device, enabling new features and user applications.

The TMP006 integrates an on-chip MEMS thermopile sensor, signal conditioning, a 16-bit analog-to-digital-converter, local temperature sensor and voltage references on a 1,6 x 1,6 mm chip. It consumes 240 quiescent current and 1 μA in shutdown mode, and supports a wide temperature range of -40°C to +125°C with an accuracy of ±0,5°C on the local sensor and ±1°C for the passive IR sensor. The IC includes an I²C/SMBus digital interface.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Cost-effective microcontroller series
Altron Arrow DSP, Micros & Memory
The STM32C5 series from STMicroelectronics delivers an excellent balance of performance, efficiency, and affordability for embedded designs that require more capability without increasing bill of materials cost.

Read more...
Understanding two key tools for cleaner serial data
Altron Arrow Editor's Choice Analogue, Mixed Signal, LSI
Understanding how pre-emphasis and equalisation works, and when to use one over the other, is critical when designing reliable high-speed systems.

Read more...
Connected without limits: An engineering perspective on Altron Arrow’s wireless ecosystem
Altron Arrow Editor's Choice Design Automation
Wireless connectivity is no longer a supporting technology, but rather, a core design consideration that underpins modern electronic systems across industries.

Read more...
Analogue reservoir AI chip capable of real-time learning
Altron Arrow AI & ML
TDK Corporation has jointly developed a prototype of a reservoir AI chip using an analogue electronic circuit that mimics the cerebellum with Hokkaido University.

Read more...
Ultra-low jitter clocks
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Skyworks has introduced a new family of ultra-low jitter programmable clocks designed to meet the increasing demands of next-gen connectivity.

Read more...
Efficient Bluetooth SoC
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The EFR32BG29 wireless SoC from Silicon Labs is a highly efficient, high memory, low-power, and ultra compact SoC designed for secure and high-performance wireless networking for IoT devices.

Read more...
RTOS – The future of embedded systems
Altron Arrow Edge Computing & IIoT
At the heart of the next generation of embedded devices is efficient yet powerful system-level code, often based on an open-source real-time operating system.

Read more...
Real-time monitoring for smart power distribution
CST Electronics Test & Measurement
By leveraging high-precision measurement, high-speed wave-recording, and AI-enabled analytics, the InHand Wireless Overhead-lines System empowers power utilities to accurately identify line faults and perform comprehensive load analysis.

Read more...
Reference design for NB-IoT plus GNSS
Altron Arrow Design Automation
ST Microelectronics’ STDES-ST87M01IGN is a reference design for the ST87M01 NB-IoT + GNSS module, implemented on a 2-layer FR4 PCB (90 x 60 x 1,6 mm).

Read more...
Gen5 Pro enhances power conversion
Altron Arrow Power Electronics / Power Management
The Infineon Technologies CoolSET ICE501XD and ICE502XD PWM Fixed Frequency Gen5 Pro controllers are advanced solutions for auxiliary power supplies in demanding high-voltage applications.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved