Passive Components


Thermistor sample kits

20 July 2011 Passive Components

TDK-EPC is offering three new sample kits of ceramic PTC thermistors from EPCOS.

The components of the sample kit ‘SMD PTC Thermistors for Limit Temperature Sensing/Superior Series’ are designed for use as temperature sensors, for instance in LED lamps, power supplies and notebooks. The kit contains samples for sizes 0402, 0603 and 0805 across the temperature range between 75°C and 145°C in steps of 10°C. All thermistors are certified to AEC-Q200 and are suitable for reflow and wave soldering.

The sample kit ‘SMD PTC Thermistors for Over-current Protection’ contains components for surge current protection applications. They are used as self-resetting fuses and as such limit currents to uncritical values in the event of overload or short circuit. These thermistors are available in sizes 0603, 1210, 3225 and 4032.

The components in the sample kit ‘PTC Thermistors for Inrush Current Limiters’ are suitable as inrush current limiters in AC-DC inverters, frequency converters, air-conditioning systems, pumps and all other equipment that exposes the power line to high inrush currents.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Low-profile aluminium electrolytic capacitors
25 November 2019, TRX Electronics , Passive Components
At 2 and 3 mm thin, Cornell Dubilier’s ULP series offers high energy density in a low-profile aluminium electrolytic capacitor. Designed specifically for applications requiring bulk capacitance and the ...

Read more...
Automotive-qualified TVS diodes
25 November 2019, Electrocomp , Circuit & System Protection
Bourns announced the release of the Model 15KPA-SD-Q transient voltage suppressor diode series. This series was designed for use in DC bus clamping applications and for the protection of sensitive electronic ...

Read more...
Robust DC link capacitors
25 November 2019, Electrocomp , Passive Components
TDK’s new B2568* series of EPCOS MKP DC link power capacitors offer high robustness under harsh environmental conditions. The new capacitors are designed for voltages of between 900 and 3000 V d.c. and ...

Read more...
AC film capacitors
25 November 2019, Electrocomp , Passive Components
The B3237x FilterCaps MKD range of EPCOS AC film capacitors from TDK offer a 200 to 1000 VRMS voltage range, a 2475 V d.c. maximum voltage rating, and a ±5% tolerance. The B3237x series is available in ...

Read more...
Waterproof Micro USB connector
23 October 2019, Electrocomp , Interconnection
As part of a new product line from GCT, the aquanex waterproof range brings together high-performance USB connectors with IP67 rated sealing. The first connector launched from the aquanex range, the USB3500, ...

Read more...
Automotive dead reckoning module
25 November 2019, Electrocomp , Telecoms, Datacoms, Wireless, IoT
The MC-1612-DG, made by Locosys, is a single-band multi-system with an Arm base processor. It not only supports GPS, GLONASS, Galileo, QZSS and SBAS, but also has a Flash memory, TCXO, RTC crystal, LNA ...

Read more...
High-power chip resistors
25 November 2019, TRX Electronics , Passive Components
Panasonic has released a line of resistors to help engineers produce cheaper, smaller and more efficient designs. The legacy resistors of the ERJ series have been made smaller while handling the same ...

Read more...
Waterproof Micro USB connector
25 November 2019, Electrocomp , Interconnection
As part of a new product line from GCT, the aquanex waterproof range brings together high-performance USB connectors with IP67 rated sealing. The first connector launched from the aquanex range, the USB3500, ...

Read more...
Magnetic jacks of all trades
25 November 2019, Electrocomp , Interconnection
Molex magnetic jacks incorporate wire-wound components (magnetics) in standard RJ45 jacks. These integrated magnetics, resistors and/or capacitors filter common-mode noise to provide signal integrity, ...

Read more...
High-current power shunts
25 November 2019, TRX Electronics , Passive Components
Ideal for high-current applications, the PSx series of shunts has been expanded by KOA. Built using a solid metal alloy resistance element with copper terminations, the device also has a low temperature ...

Read more...