Manufacturing / Production Technology, Hardware & Services


Film coater

3 August 2011 Manufacturing / Production Technology, Hardware & Services

Nordson ASYMTEK has introduced a new film coater for automated, selective and precision application of conformal coating materials. The Select Coat SC-280 provides greater than 99% fluid transfer efficiency, improving material utilisation by 30 to 50%. It selectively coats complex circuit boards in seconds. Because the coating material is not atomised and is precisely applied to the selected areas, overspray, masking and rework associated with conventional conformal coating processes are minimised or eliminated.

The system applies conformal coating material in a controlled, uniform film rather than an atomised spray. Material is directed under low pressure through the dispenser and dispensing nozzle. Material is applied to the circuit board prior to the point of atomisation.

The SC-280 has a single valve design and comes in two versions: circulating (SC-280C) and non-circulating (SC-280N). It handles viscosities of less than 100 centipoise (cps). Coating thicknesses range from 0,5 to 8 mils for solvent-based materials. The stainless steel fluid path is compatible with virtually all coating materials.

A variety of cross-cut nozzles are available to dispense film pattern widths from 6 to 19 mm. Each nozzle delivers sharp edge definition with a tolerance of ±0,75 mm. The film coater has a 0 to 90° rotating axis and an optional five-axis accessory allows tilting of the nozzle to coat all four sides and under the components.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Yamaha reveals software innovations to boost printing, mounting, and intelligent factory
Truth Electronic Manufacturing Manufacturing / Production Technology, Hardware & Services
Yamaha Robotics Europe SMT Section has added new features to native equipment software and Intelligent Factory tools that accelerate equipment programming, increase production efficiency, and enhance factory productivity.

Read more...
UltiMaker introduces defence-grade 3D printing
RS South Africa Manufacturing / Production Technology, Hardware & Services
Leading at launch are the UltiMaker S6 Secure and UltiMaker S8 Secure, two robust solutions designed to deliver trusted and reliable, on-demand production capabilities.

Read more...
The future is built by hand
Manufacturing / Production Technology, Hardware & Services
Choosing a trade or technical path does not just open doors for your future self. It opens doors for the people you will serve, the systems you will maintain, the businesses you will grow, and the communities you will strengthen.

Read more...
September exclusives at PCBWay: Big savings on PCBs and 3D printing
PCBWay Manufacturing / Production Technology, Hardware & Services
[Sponsored] This September, PCBWay is bringing you two exciting, limited time offers that showcase both style and versatility. Whether you are designing with PCBs or prototyping with 3D printing, these will help you create more while spending less.

Read more...
Understanding solder paste viscosity and thixotropy
Truth Electronic Manufacturing Manufacturing / Production Technology, Hardware & Services
A solder paste’s viscosity and thixotropic properties, a measure of its resistance to flow, influence its performance in different production environments.

Read more...
Global electronics trade in an age of disruption
Manufacturing / Production Technology, Hardware & Services
Governments should invest in domestic strengths, coordinate with international partners, and align trade and industrial policy with the realities of a globally connected electronics sector.

Read more...
The new tool design of IWISS
Startech Industrial Manufacturing / Production Technology, Hardware & Services
Rooted in IWISS’ dedication to reliability, comfort, and efficiency, the company’s new design refresh elevates craftsmanship by incorporating a rich cultural influence.

Read more...
Strategic collaboration to advance industrial robotics training in South Africa
Manufacturing / Production Technology, Hardware & Services
Yaskawa Southern Africa has announced a strategic collaboration with Sol-Tech, a private vocational training institution based in Pretoria, to strengthen technical education in industrial robotics.

Read more...
Filling high-end PCB manufacturing gaps to accelerate AI electronics growth
PCBWay Manufacturing / Production Technology, Hardware & Services
[Sponsored] In the digital era, AI and big data technologies are developing at a rapid pace. PCBWay is continuously advancing its PCB manufacturing technology to support the growth.

Read more...
Microtronix revives defunct cell phone plant
Microtronix Manufacturing Editor's Choice Manufacturing / Production Technology, Hardware & Services
In a significant move for South Africa’s struggling electronics manufacturing sector, local technology firm Microtronix has breathed new life into a formerly defunct cell phone manufacturing facility.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved