Power inductors
17 August 2011
Passive Components
New from Murata Power Solutions are the 2700 and 2700T series of surface-mount, low-profile power inductors aimed at a broad range of consumer electronic devices. The series has been designed specifically for use in applications where a low component height is crucial, such as in handheld equipment and notebook computers.
The 2700 series, measuring just 9,0 x 7,7 x 1,65 mm, offers a wide range of inductance values from 4,7 to 1000 μH and a device-dependent maximum DC current up to 1,6 A. DC resistance values range from 0,1 Ω up to 14 Ω for the 1 mH part. The slightly smaller 2700T series provides inductance values in the range of 1 to 330 μH with a maximum operating current up to 2,0 A. DC resistance is 80 mΩ for the 1 μH part and increases up to 15 Ω for the 330 μH inductor.
Both inductor series have an operating temperature from -40°C to +125°C and are available in custom inductance values. They are supplied on tape and reel for high-volume automated surface mount assembly. Peak reflow solder temperature is 260°C as required by J-STD-020D.
For more information contact Greg Parker, Avnet Kopp, +27 (0)11 809 6100, [email protected], www.avnet.co.za
Further reading:
SMT flat-wire inductor for automotive electronics
Passive Components
Würth Elektronik introduces its new WE-SFIA series of flat-wire inductors in 2010, 2013, and 2016 packages.
Read more...
Nanocrystalline cores for cable assembly
Passive Components
Conventional MnZn and NiZn ferrite cores for cable assembly are now complemented by nanocrystalline cable cores.
Read more...
Heat sinks for power-electronics and IC components
Passive Components
Würth Elektronik introduces heat sinks for power-electronics and IC components.
Read more...
Cooling solutions for modern electronics
Future Electronics
Passive Components
As electronic systems become more compact and powerful, effective thermal management has become a critical aspect of product design.
Read more...
DC-link capacitors with ultra-low inductance
Electrocomp
Passive Components
TDK Corporation recently released its new series of MKP DC high-frequency film capacitors, a high-performance DC link capacitor platform for next-generation SiC-based power electronics.
Read more...
Generating negative voltages from a positive supply
Altron Arrow
Editor's Choice Passive Components
It is common for IoT devices, industrial sensors, meters, and medical equipment to require both a positive and negative voltage, and this article explains the options available to produce a negative rail from a positive rail supply.
Read more...
High-precision thick-film resistors
Avnet Silica
Passive Components
The new Panasonic ERJPC high precision thick-film resistors series deliver accuracy levels previously only achievable with thin film technology, offering customers higher power density and cost-effective performance.
Read more...
Semi-shielded power inductors
RS South Africa
Passive Components
The SDCx family from Eaton includes the SDCL and SDCH series of semi-shielded power inductors designed for reliable performance in consumer, industrial, energy, and medical applications.
Read more...
Compact high-current power inductor
EBV Electrolink
Passive Components
Vishay’s IHLP series power inductors deliver high current capability in an ultra-low profile, magnetically shielded design.
Read more...
Tiny noise suppression filters
RS South Africa
Passive Components
TDK Corporation recently announced its latest noise suppression filters of the MAF0603GWY series, which measure only 0,6 x 0,3 x 0,3 mm.
Read more...
printer friendly version