The custom-assembly Sunclix plug connector from Phoenix Contact makes it possible to contact conductor cross-sections from 6 mm² to 16 mm². It was developed to answer the needs of ever-larger photovoltaic (PV) units in which the distance between module or string and the generator junction boxes or inverters is steadily increasing. Conductors with a large cross section are required to minimise the transfer loss in the solar cable.
The DC plug connector can be assembled on site within 15 to 20 seconds without the need for any special tools. Preparation of the single-piece plug for use in PV installations takes place in three easy steps: the PV conductor is stripped, inserted into the terminal, and then the connection spring is pressed down. In the last step, the plug is pushed together and screwed tight.
The plug connectors, classified according to type IP68 protection (2 m/24 h), comply with the DIN EN 50521 standard. High-quality materials make for long-term reliability and stability under all weather conditions. A locking clamp (unlocked using a screw driver) prevents the unintended opening of the plug connector.
Connectors for the Smart Factory Spectrum Concepts
Interconnection
[Sponsored] Designing networks for the smart factory can seem daunting, but the solutions are already available with Samtec providing a comprehensive range of interconnect technologies tailored to the demands of the modern factory.
Read more...Explosive zone connectors
Interconnection
The connector series design by Glenair is optimised for fast and easy crimp-contact wire termination, with ample wiring space in the cable housing and accessory hardware.
Read more...Battery modules with lithium iron phosphate technology Phoenix Contact
Enclosures, Racks, Cabinets & Panel Products
With its new lithium battery modules with IQ Technology, Phoenix Contact is expanding its portfolio with powerful energy storage solutions with a capacity of 284 Wh.
Read more...Reliable photovoltaic adapter set Phoenix Contact
Interconnection
Phoenix Contact’s PV-AS-MC4/6-150-MN-SET1 is a high-performance photovoltaic adapter set designed to bridge SUNCLIX connectors with MC4 connectors.
Read more...Multi-config connector series Future Electronics
Interconnection
Hirose Electric’s DF11 Series is a versatile 2,0 mm pitch, double-row board-to-wire connector designed to simplify a wide range of connection needs.
Read more...Ultra-rugged connector Hiconnex
Interconnection
Radiall has introduced a new connector for ribbon fibre connections called Fortero to provide proven performance in high-vibration, high-impact, and extreme environments.
Read more...Innovative D-Sub PushPull hood Hiconnex
Interconnection
HARTING has launched its new D-Sub PushPull housings, designed to improve efficient and process-safe handling by transforming a well-known connector family into a simplified solution.
Read more...High-density multicoax assemblies RFiber Solutions
Interconnection
Withwave’s high speed and high-density multicoax cable assemblies provides a wide range of multiple coax connectors and flexible cable assemblies.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version